Command Line Reference
This section describes all GigaVUE‑OS commands. The commands are organized alphabetically.
For a summary of all the commands and their syntax, refer to Command Line Summary.
Refer to the top-level commands as follows:
| Command | Description |
|
Configures authentication, authorization, and accounting settings. |
|
|
Enables access to Gigamon Applications, such as Application Session Filtering (ASF), GTP backup, GTP whitelisting, Hardware Security Module (HSM), HSM group, icap, SSL Decryption for inline tools, keystore, NetFlow, SIP whitelisting, and Passive SSL decryption. GigaSMART applications are not supported on GigaVUE TA Series. |
|
|
Sets a system login banner. |
|
|
Configures bonded interface settings. |
|
|
Configures system boot parameters. |
|
|
Configures a line card or module. On GigaVUE TA Series nodes, use the card (GigaVUE®TA Series) command to enable additional ports. |
|
|
Configures the GigaVUE HC Series chassis. |
|
|
Resets statistics or clears caches. |
|
|
Configures CLI shell options. |
|
|
Sets the system clock or timezone. |
|
|
Configures a cluster of connected GigaVUE‑OS nodes. |
|
|
Manages configuration files. |
|
|
Enters Configure mode. |
|
|
Upgrades the BIOS image on GigaVUE-TA100, GigaVUE‑HC1, and GigaVUE‑HC3. |
|
|
Manages X.509 certificates for theGigaVUE HC Series node’s Web server. |
|
|
Generates a dump file for use in debugging issues with Gigamon Technical Support. |
|
|
Exits Enable mode and returns to Standard mode. |
|
|
Configures email and event notification through email. |
|
|
Enters Enable mode. |
|
|
Exits Configure mode and returns to Enable mode or logs out of the CLI. |
|
|
Configures advanced hashing parameters on stack GigaStreams and gsgroups. |
|
|
Manages TCP and debug dump files on disk. |
|
|
Configures flexible filter templates on GigaVUE‑HC3 and GigaVUE-TA100. |
|
|
Configures a stack port interface to provide Internet connectivity for a GigaSMART card or module. |
|
|
Configures a GigaStream—a group of ports acting as a single addressable tool port destination or stack-link. |
|
|
Configures a GigaSMART group consisting of one or more GigaSMART engine ports. GigaSMART applications are not supported on GigaVUE TA Series. |
|
|
Configures a GigaSMART operation consisting of one or more advanced processing applications. GigaSMART applications are not supported on GigaVUE TA Series. |
|
|
Configures GigaSMART parameters. GigaSMART applications are not supported on GigaVUE TA Series. |
|
|
Configures a Control and User Plane Seperation (CUPS) gta profile on a Control Processing Plane for routing the Gigamon Transport Agent (GTA) packets. |
|
|
Shuts down the system without powering it off. |
|
|
Configures a heartbeat profile on GigaVUE HC Series nodes. |
|
|
Configure the Header Stripping protocol for a chassis. |
|
|
Views a description of the interactive help system. |
|
|
Specifies the system's hostname. The hostname appears in the system prompt and in SNMP traps. |
|
|
Configures the Resilient Inline Arrangement feature. |
|
|
Manages system software images. |
|
|
Configures an inline network on GigaVUE HC Series nodes. |
|
|
Configures an inline network group onGigaVUE HC Series nodes. |
|
|
Configures an inline tool series onGigaVUE HC Series nodes. |
|
|
Configures an inline tool on GigaVUE HC Series nodes. |
|
|
Configures an inline tool group on GigaVUE HC Series nodes. |
|
|
Configures network interfaces. |
|
|
Configures IP settings for the eth0 Mgmt port. |
|
|
Configures an IP interface to be used for GigaSMART encapsulation/decapsulation operations. This command is not supported on GigaVUE TA Series nodes. |
|
|
Configures IPv6 settings for the eth0 Mgmt port. |
|
|
Configures scheduled jobs. |
|
|
Configures LDAP server settings for authentication. |
|
|
Activates features using license keys. Licensing is used for GigaSMART, Port, or Advanced Features License. |
|
|
Configures event logging. |
|
|
Configures maps and map rules to manage GigaVUE traffic distribution. |
|
|
Configures map groups for GTP forward listing and GTP flow sampling. |
|
|
Creates a passall map to send all traffic on a network port to a tool port irrespective of the other packet distribution in place on the port. |
|
|
Configures shared collector map parameters. |
|
|
Creates a map template. |
|
|
Configures a negative heartbeat profile on GigaVUE HC Series nodes. |
|
|
Deletes or clears certain configuration options. |
|
|
Configures notification settings. |
|
|
Enables and disables the use of NTP, as well as adds NTP servers. |
|
|
Sets system clock once from a remote server using NTP. |
|
|
Reboots a Certified Traffic Aggregation White Box (white box) into Open Network Install Environment (ONIE) modes. This command is only available on white boxes where GigaVUE‑OS is installed. |
|
|
Sends ICMP echo requests to a specified host. |
|
|
Sends ICMPv6 echo requests to a specified host. |
|
|
Upgrades programmable logic devices (PLDs) on GigaVUE‑HC3 nodes. |
|
|
Configures an Active Visibility policy. |
|
|
Configures port type, parameters, and filters. |
|
|
Creates a group of ports. |
|
|
Configures a port-pair on a pair of network ports within the same GigaVUE HC Series node. A port-pair is a bidirectional connection in which traffic arriving on one port in the pair is transmitted out the other (and vice-versa) as a pass through TAP. |
|
|
Enables and disables the use of PTP. |
|
|
Configures RADIUS server settings for authentication. |
|
|
Configures an inline redundancy profile onGigaVUE HC Series nodes. |
|
|
Reboots or shuts down the node. |
|
|
Resets specified portions of the system configuration to their factory states. |
|
|
Sets options for the serial console port. |
|
|
Reserved for future use. |
|
|
Displays configuration and status information for GigaVUE HC Series settings and entities. |
|
|
Sleeps for a specified number of seconds. |
|
|
Configures SNMP settings, including the local SNMP server, notification events, and notification destinations. |
|
|
Configures spine links in a cluster with a leaf and spine architecture. |
|
|
Enables and disables SSH access, as well as manages settings. |
|
|
Configures a stack-link between two GigaVUE HC Series nodes in a cluster. Stack-links are used to carry data traffic between nodes in a GigaVUE HC Series cluster. |
|
|
Changes system settings. |
|
|
Configures system health behaviors. |
|
|
Configures TACACS+ server settings for authentication. |
|
|
Sets terminal parameters, including width and length. |
|
|
Configures the timestamp source. This command is not supported on GigaVUE TA Series nodes. |
|
|
Configures a tool-mirror connection between two tool ports. A tool-mirror connection sends all packets arriving on one tool port to a second tool port on the same node. |
|
|
Traces the route packets take to a destination. |
|
|
Configures a circuit tunnel between two clusters. |
|
|
Configures a tunnel endpoint, which is a destination for load balanced traffic from a L2GRE encapsulation tunnel. |
|
|
Installs new uboot software. |
|
|
Manages user accounts. |
|
|
Configures a virtual port. This command is not supported on GigaVUE TA Series nodes. |
|
|
Configures the Web server used for the management of GigaVUE HC Series nodes using the GigaVUE‑FM GUI. |
|
|
Saves the running configuration to persistent storage. |
