Command-Line Reference
Command |
Description |
Configures authentication, authorization, and accounting settings. |
|
Enables access to Gigamon Applications, such as Application Session Filtering (ASF), GTP backup, GTP whitelisting, Hardware Security Module (HSM), HSM group, inline SSL decryption, keystore, NetFlow, SIP whitelisting, and out-of-band SSL decryption. GigaSMART applications are not supported on GigaVUE TA Series. |
|
Sets a system login banner. |
|
Configures bonded interface settings. |
|
Configures system boot parameters. |
|
Configures a line card or module. On GigaVUE TA Series nodes, use the card (GigaVUE TA Series) command to enable additional ports. |
|
Configures the GigaVUE H Series chassis. |
|
Resets statistics or clears caches. |
|
Configures CLI shell options. |
|
Sets the system clock or timezone. |
|
Configures a cluster of connected GigaVUE-OS nodes. |
|
Manages configuration files. |
|
Enters Configure mode. |
|
Upgrades the BIOS image on GigaVUE-TA100, GigaVUE-TA100-CXP, GigaVUE‑HC1, and GigaVUE-HC3. |
|
Manages X.509 certificates for the GigaVUE H Series node’s Web server. |
|
Generates a dump file for use in debugging issues with Gigamon Technical Support. |
|
Exits Enable mode and returns to Standard mode. |
|
Configures email and event notification through email. |
|
Enters Enable mode. |
|
Exits Configure mode and returns to Enable mode or logs out of the CLI. |
|
Configures advanced hashing parameters on stack GigaStreams and gsgroups. |
|
Manages TCP and debug dump files on disk. |
|
Configures flexible filter templates on GigaVUE-HC3 and GigaVUE-TA100. |
|
Configures a stack port interface to provide Internet connectivity for a GigaSMART card or module. |
|
Configures a GigaStream—a group of ports acting as a single addressable tool port destination or stack-link. |
|
Configures a GigaSMART group consisting of one or more GigaSMART engine ports. GigaSMART applications are not supported on GigaVUE TA Series. |
|
Configures a GigaSMART operation consisting of one or more advanced processing applications. GigaSMART applications are not supported on GigaVUE TA Series. |
|
Configures GigaSMART parameters. GigaSMART applications are not supported on GigaVUE TA Series. |
|
Configures a Control and User Plane Seperation (CUPS) gta profile on a Control Processing Plane for routing the Gigamon Transport Agent (GTA) packets. |
|
Shuts down the system without powering it off. |
|
Configures a heartbeat profile on GigaVUE HC Series nodes. |
|
Views a description of the interactive help system. |
|
Specifies the system's hostname. The hostname appears in the system prompt and in SNMP traps. |
|
Configures the Resilient Inline Arrangement feature. |
|
Manages system software images. |
|
Configures an inline network on GigaVUE HC Series nodes. |
|
Configures an inline network group on GigaVUE HC Series nodes. |
|
Configures an inline tool series on GigaVUE HC Series nodes. |
|
Configures an inline tool on GigaVUE HC Series nodes. |
|
Configures an inline tool group on GigaVUE HC Series nodes. |
|
Configures network interfaces. |
|
Configures IP settings for the eth0 Mgmt port. |
|
Configures an IP interface to be used for GigaSMART encapsulation/decapsulation operations. This command is not supported on GigaVUE TA Series nodes. |
|
Configures IPv6 settings for the eth0 Mgmt port. |
|
Configures scheduled jobs. |
|
Configures LDAP server settings for authentication. |
|
Activates features using license keys. Licensing is used for GigaSMART, Port, or Advanced Features License. |
|
Configures event logging. |
|
Configures maps and map rules to manage GigaVUE traffic distribution. |
|
Configures map groups for GTP whitelisting and GTP flow sampling. |
|
Creates a passall map to send all traffic on a network port to a tool port irrespective of the other packet distribution in place on the port. |
|
Configures shared collector map parameters. |
|
Creates a map template. |
|
Configures a negative heartbeat profile on GigaVUE HC Series nodes. |
|
Deletes or clears certain configuration options. |
|
Configures notification settings. |
|
Enables and disables the use of NTP, as well as adds NTP servers. |
|
Sets system clock once from a remote server using NTP. |
|
Reboots a Certified Traffic Aggregation White Box (white box) into Open Network Install Environment (ONIE) modes. This command is only available on white boxes where GigaVUE-OS is installed. |
|
Sends ICMP echo requests to a specified host. |
|
Sends ICMPv6 echo requests to a specified host. |
|
Upgrades programmable logic devices (PLDs) on GigaVUE-HC3 nodes. |
|
Configures an active visibility policy. |
|
Configures port type, parameters, and filters. |
|
Creates a group of ports. |
|
Configures a port-pair on a pair of network ports within the same GigaVUE H Series node. A port-pair is a bidirectional connection in which traffic arriving on one port in the pair is transmitted out the other (and vice-versa) as a passthrough TAP. |
|
Enables and disables the use of PTP. |
|
Configures RADIUS server settings for authentication. |
|
Configures an inline redundancy profile on GigaVUE HC Series nodes. |
|
Reboots or shuts down the node. |
|
Resets specified portions of the system configuration to their factory states. |
|
Sets options for the serial console port. |
|
Reserved for future use. |
|
Displays configuration and status information for GigaVUE H Series settings and entities. |
|
Sleeps for a specified number of seconds. |
|
Configures SNMP settings, including the local SNMP server, notification events, and notification destinations. |
|
Configures spine links in a cluster with a leaf and spine architecture. |
|
Enables and disables SSH access, as well as manages settings. |
|
Configures a stack-link between two GigaVUE H Series nodes in a cluster. Stack-links are used to carry data traffic between nodes in a GigaVUE H Series cluster. |
|
Changes system settings. |
|
Configures system health behaviors. |
|
Configures TACACS+ server settings for authentication. |
|
Sets terminal parameters, including width and length. |
|
Configures the timestamp source. This command is not supported on GigaVUE TA Series nodes. |
|
Configures a tool-mirror connection between two tool ports. A tool-mirror connection sends all packets arriving on one tool port to a second tool port on the same node. |
|
Traces the route packets take to a destination. |
|
Configures a circuit tunnel between two clusters. |
|
Configures a tunnel endpoint, which is a destination for load balanced traffic from a L2GRE encapsulation tunnel. |
|
Installs new uboot software. |
|
Manages user accounts. |
|
Configures a virtual port. This command is not supported on GigaVUE TA Series nodes. |
|
Configures the Web server used for H-VUE GUI support on the GigaVUE H Series node. |
|
Saves the running configuration to persistent storage. |