onie

Required Command-Line Mode = Configure
Required User Level = Admin

Use the onie command to reboot a Certified Traffic Aggregation White Box (white box) into Open Network Install Environment (ONIE) modes of debug, reinstall, uninstall, and update. ONIE automatically discovers, fetches, and executes the GigaVUE-OS installer.

This command is only available on white boxes on which GigaVUE-OS is installed.

The onie command has the following syntax:

onie reboot mode <debug | reinstall | uninstall | update>

The following table describes the arguments for the onie command:

Argument

Description

reboot mode <debug | reinstall | uninstall | update>

Specifies the ONIE reboot modes as follows:

debug—reboots the white box into ONIE debug mode.
reinstall—reboots the white box into ONIE reinstall mode.
uninstall—reboots the white box into ONIE uninstall mode. Uninstall wipes off all non-ONIE reserved regions of NOR flash and storage block device.
update—reboots the white box into ONIE update mode used for updating the ONIE firmware.

For example:

(config) # onie reboot mode debug
(config) # onie reboot mode reinstall
(config) # onie reboot mode uninstall
(config) # onie reboot mode update