Configuration Netflow Generation Example

Configure NetFlow Generation

The following are the step for setting up a typical NetFlow Generation configuration with GigaVUE-FM:

■   Step 1: Configure a GigaSMART Group
■   Configuration Netflow Generation Example
■   Configuration Netflow Generation Example
■   Configuration Netflow Generation Example
■   Configuration Netflow Generation Example
■   Configuration Netflow Generation Example
■   Configuration Netflow Generation Example
■   Configuration Netflow Generation Example

Configure a GigaSMART Group using the following steps. you will use this GigaSMART Group in Configuration Netflow Generation Example, where you assign a NetFlow Monitor to the group.

1.   From the device view, select GigaSMART > GigaSMART Groups.
2. Click New to create a new GigaSMART Group or select an existing GigaSMART Group and click Edit.
3. Enter an alias to help identify this GigaSMART group. For example, Netflow-gsgrp
4. Select an engine port (the e port references the GigaSMART line card or module) Your GigaSMART group should look similar to the example shown in the following figure.

5. Click Save.

Notes:

■   The GigaSMART Group can contain multiple GigaSMART engine ports.
■   Only one NetFlow Generation Monitor can be configured per GigaSMART Group.