Configure Inline Single Tag
To configure an inline single tag:
|
1.
|
From the left pane, go to Physical > Orchestrated Flows > Inline Flows, and then click Configuration Canvas to create a new Flexible Inline Canvas. |
|
2.
|
In the Flexible Inline Canvas that is displayed, select the required inline network from the list of devices. |
|
3.
|
Drag and drop the inline network into the canvas. |
|
4.
|
Click Settings to open the Settings pane. |
|
5.
|
Select the Enable check box for the Show Single Tag Options, and then enter the VLANS expected on the inline network. |
|
6.
|
Drag and drop a flexible inline map object into the canvas, and then click the map to open the Properties pane. |
|
7.
|
Select the Enable check box for the Single Tag Mode, and then enter the tool side VLAN tags. Select the TPID for the Tool Side VLAN Tag. The default value of TPID is 0x8100. You can select the other supported values 0x9100 and 0x88a8 from the drop-down list. The VLAN qualifier is added to the rules by GigaVUE‑FM. If you do not specify any rules, GigaVUE‑FM adds a rule with the VLAN qualifier to the map. You can use the check box 'Enable Network side VLAN Tag' to bulk enable or disable the VLAN tags added for flexinline maps. |
Note: You can choose to enable or disable the Single Tag Mode for collector maps, if required.
|
8.
|
Drag and drop the required inline tools into the canvas. |
|
9.
|
Drag and drop the OOB Copy into the canvas, if required. |
|
10.
|
Click Port Editor, and then in the Quick Port Editor, scroll down to the hybrid or tool ports that you wish to configure. Select Enable to administratively enable the ports, and then click OK. |
|
11.
|
From the Destination Ports drop-down list, select the required hybrid or tool ports that you want to configure as destination ports. You can also select a hybrid or tool GigaStream. For information about GigaStream, refer to “How to Use GigaStream” section. |
|
12.
|
From the VLAN Tag drop-down list, select the required tags. |
|
13.
|
Click OK to save the configuration. |
After deploying the solution , any unused VLAN Tags will be preserved and displayed. The VLAN tags are displayed in the same order that they were configured. Similarly, the VLAN Table window would list the maps as displayed in the configuration canvas.
Note: In GigaVUE‑HC1-Plus, if the inline networks traffic path is in monitoring mode, you cannot enable the Single Tag Mode.
Note: If you enable the Single VLAN tag option in Flexible iSSL solution, you should also enable the Single VLAN Tag configuration in the inline-ssl app profile deployed in the solution
