Install Custom Certificate

GigaVUE V Series Node, GigaVUE V Series Proxy, and UCT-V Controllers have default self-signed certificates installed. While secure, these certificates may trigger trust warnings during security scans. To avoid this, you can install your own SSL/TLS certificates.

You can upload the custom certificate using one of the following options:

Upload Custom Certificates using GigaVUE-FM

To upload the custom certificate using GigaVUE‑FM, perform the following steps:

  1. Go to Inventory > Security > Custom SSL Certificate. The Custom Certificate Configuration page appears.
  2. On the Custom Certificate Configuration page, select Add. The New Custom Certificate page appears.
  3. Enter or select the following information.

    • Certificate Name: Enter the custom certificate name.

    • Certificate: Select Upload to upload the certificate.

    • Private Key: Select Upload to upload the private key associated with the certificate.

  4. Select Save.

You must also add the root or the leaf CA certificate to the Trust Store. For details, refer to Trust Store.

You can also link the uploaded certificates to the respective GigaVUE V Series Node, GigaVUE V Series Proxy, and UCT-V Controller in the Fabric Launch Configuration Page.

For more information, refer to the Configure GigaVUE Fabric Components in GigaVUE-FM topic in the respective cloud guides.

Note:  The minimum value for the authentication key encryption length provided during the key generation is 2048.

Upload Custom Certificate using Third-Party Orchestration

Using your cloud platform, you can also upload custom certificates to GigaVUE V Series Nodes, GigaVUE V Series Proxy, and UCT-V Controller when deploying the fabric components.

Refer to the topics below for more detailed information on how to upload custom certificates using third party orchestration in the respective platforms.

For integrated mode:

For generic mode: