Deploy GigaVUE V Series Nodes for Inline V Series Solution

GigaVUE V Series Node will be launched an managed by AWS Load Balancer and it will be registered with GigaVUE-FM.

To deploy GigaVUE V Series Node across the AWS accounts with Gateway Load Balancing in GigaVUE-FM:

  1. Go to Inventory > VIRTUAL > AWS , and then click Monitoring Domain.
  2. On the Monitoring Domain page, click the New button. The Monitoring Domain Configuration page appears.
  3. In the Monitoring Domain Configuration page, select Inline as the Traffic Acquisition method. Refer to Create a Monitoring Domain for detailed information.
  4. Enter the Monitoring Domain Name and the Connection Name as mentioned in the user data provided during the template launch in AWS. Refer to Configure a Gateway Load Balancer in AWS for Inline V Series Solution section for more detailed information.
  5. Turn on the Use FM to launch Proxy toggle, to launch the GigaVUE V Series Proxy using GigaVUE-FM.

    Note:  You can use GigaVUE V Series proxy if GigaVUE-FM cannot directly reach the GigaVUE V Series Nodes (management interface) directly over the network. GigaVUE V Series Proxy is a optional component.

    1. From the Image drop-down list, select the required image.
    2. From the Size drop-down list, select the instance size.
    3. Under Number of Instances, specify the required number of instances.
    4. Under Management Subnet:
    5. Select the IP Address Type as Private or Public.
    6. From the Subnet drop-down list, select the management subnet.
    7. Click Add Subnet under Additional Subnets to add additional subnets.
    8. Click Add under Tags to assign tags for resource identification.
  6. Click Save. The Monitoring Domain is created successfully and you are navigated to the AWS Fabric Launch Configuration page.
  7. From the Centralized VPC drop-down list, select the VPC.
  8.  From the Gateway Load Balancer drop-down list, select the Load Balancer configured in AWS.
  9. Under Node Groups, you can configure multiple node groups based on the deployment use case. Refer to Inline V Series for more details.
    1. Inline Node Group: This node group is used for the Inline V Series Node that is used for traffic acquisition.
      1. In the Inline Node Group Name field, enter a name for the node group.
      2. From the Inline Auto Scaling Group drop-down list, select the auto scaling group in which the Inline V Series Node is deployed.
    2. Node Group: You can add or delete node groups using the + and - buttons. The GigaVUE V Series Nodes present in these node groups are used for traffic processing.
      1. In the Node Group Name field, enter a name for the node group.
      2. From the Auto Scaling Group drop-down list, select the auto scaling group configured in AWS.

        Note:  You can configure a maximum of eight Node groups.

  10. Click Save.

Once the Monitoring Domain is successfully configured, edit the Desire capacity value for the Auto Scaling Group in AWS. Refer to Configure a Gateway Load Balancer in AWS for Inline V Series Solution section for more detailed information.

To monitor the traffic, you must create a Monitoring Session. For more information on creating a Monitoring Session, see Configure Monitoring Session for Inline V Series