Configure Tunnel Endpoint

Virtual packets find their way to physical tool ports through a GigaSMART tunnel. The tunnel starts at the GigaVUE-VM node and ends at a network port on a GigaSMART-enabled G Series or H Series node. In both cases, the receiving end of the tunnel must have a tunnel decapsulation GigaSMART Operation bound.

This section covers the following topics:

•

Tunnel Configuration Options

•

Create Tunnel Endpoint

•

Tunnel Validation

•

Configure H Series IP Interfaces for the GigaVUE-VM Tunnel Library

•

TCP Tunnel between GigaVUE-VM and GigaVUE HC Series Nodes

Document INFORMATION

ONLINE DOCUMENTATION LIBRARY

Visit the Online Product Documentation page on the Gigamon Community to find the latest documentation offerings available online. Each online documentation portal also provides PDFs associated with that release.

Send feedback to: documentationfeedback@gigamon.com

PRODUCT INFORMATION

GigaVUE-FM 5.9

This online documentation was last updated: 12/22/2022

LEGAL INFORMATION

Copyright: Copyright © 2020-2022 Gigamon Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without Gigamon’s written permission.

Trademark Attributions: Gigamon and the Gigamon logo are trademarks of Gigamon in the United States and/or other countries. Gigamon trademarks can be found at http://www.gigamon.com/legal-trademarks. All other trademarks are the trademarks of their respective owners