Inserting a Fan Tray

You can insert the entire fan tray using the following procedure.

To insert a fan tray:

1.

Remove all fan modules from the fan tray. Refer to the procedure for Removing a Fan Module.

2.

Place the empty fan tray into the slot and slide it in. Refer to Figure 1 Fan Tray Insertion.

Figure 12

Fan Tray Insertion

3.

Slide the fan tray in until it is flush with the chassis rear and will not slide in any further as shown in Figure 2 Fan Tray Inserted.

Figure 13

Fan Tray Inserted

4.

Insert the fan modules into the fan tray one at a time as shown in Figure 3 Fan Module Insertion.

Figure 14

Fan Module Insertion

5.

Tighten the thumb screws on each fan module, then use a Phillips screwdriver to tighten the screws. Refer to Figure 1 Fan Module Screw Location on GigaVUE-HC3 Rear.

6.

Tighten the thumb screws on the fan tray, then use a Phillips screwdriver to tighten the screws. Refer to Figure 1 Fan Tray Screw Location on GigaVUE-HC3 Rear.