Removing a Fan Tray

You can remove the entire fan tray using the following procedure.

Note:  If the node is powered, work quickly to remove the fan tray and insert another one. The GigaVUE-HC3 should not be without cooling for more than 60 seconds.

To remove the entire fan tray:

1.

Locate the two thumb screws at the bottom of the fan tray as shown in Figure 1 Fan Tray Screw Location on GigaVUE-HC3 Rear.

Figure 10

Fan Tray Screw Location on GigaVUE-HC3 Rear

2.

Use a Phillips screwdriver to loosen the screws on the fan tray, then loosen the thumb screws.

3.

Pull the failed fan tray out of the slot and set it aside. Refer to Figure 2 Fan Tray Removal.

Figure 11

Fan Tray Removal