GigaVUE-HC3 Modules
With a variety of interchangeable modules and 3.2Tb throughput for CCv1 and 6.4Tb throughput for CCv2, GigaVUE-HC3 nodes are ready to grow with your needs. The following modules offer port speeds of 10Gb, 25Gb, 40Gb, and 100Gb:
PRT-HC3-X24 |
|
|||||||
PRT-HC3-C08Q08 |
|
|||||||
PRT-HC3-C16 |
|
|||||||
SMT-HC3-C05 |
|
|||||||
BPS-HC3-C25F2G |
|
|||||||
BPS-HC3-C35C2G |
|
|||||||
BPS-HC3-Q35C2G |
|
Modules are hot-swappable and can be installed in any of the available front bays in a GigaVUE-HC3 node. However, refer to Module Removal and Replacement Procedure (Hot Removal) for instructions – you must follow a specific procedure when removing modules to preserve node stability.
Before installing modules in the node, the GigaVUE-HC3 node must be running software version 5.0 or higher. Before installing the PRT-HC3-C16 module, the node must be running software version 5.4 or higher and be equipped with Control Card version 2 (CCv2).