Create Monitoring Domain

To create a monitoring domain in GigaVUE-FM:

  1. Go to Inventory > VIRTUAL > OpenStack. The Monitoring Domain page appears.
  2. On the Monitoring Domain page, click New. The Monitoring Domain Configuration page appears.
  3. Enter or select the appropriate information to configure Monitoring Domain for OpenStack. Refer to the following table for field-level details.

    Note:  For the URL, User Domain Name, Project Domain Name, and Region field values, refer to the RC file downloaded from your OpenStack dashboard.

    Field

    Description

    Monitoring Domain

    A name for the monitoring domain.

    Note:  You can only view and delete the existing configuration for V Series node 1. You cannot create and perform any other actions on the existing configuration for GigaVUE V Series node 1 as the features are deprecated from GigaVUE-FM fabric manager.

    Alias

    An alias used to identify the monitoring domain.

    URL

    The authentication URL is the Keystone URL of the OpenStack cloud. This IP address must be DNS resolvable.

    Refer to the OpenStack User Manual for more information on retrieving the authentication URL from the OpenStack.

    Note:  To ensure the validity of OpenStack certificates issued by a trusted Certificate Authority (CA), you must enable the Trust Store. Refer to the Trust Store for more detailed information.

    User Domain Name

    The domain name of your OpenStack authentication domain.

    • If you are using a separate domain for AUTH, enter that domain name as User Domain Name.
    • If you are not using a separate domain, you can use the same domain for User and Project Domain Name.

    Project Domain Name

    The domain name of your OpenStack project.

    Project Name

    The name of the project used for OpenStack authentication.

    Region

    The region where the Project resides. You can find your region by running one of these commands, depending on your OpenStack version.

    keystone endpoint-list or openstack endpoint list or looking at the RC file in OpenStack to view your credentials.

    Username

    The username used to connect to your OpenStack cloud.

    Note:  If you are using OVS mirroring, you must belong to a role that meets the OpenStack minimum requirements for OVS Mirroring. Refer to OVS Mirroring Prerequisites for more information.

    Password

    The password of your OpenStack cloud.

    Traffic Acquisition Method

    Select the type of agent used to capture traffic for monitoring:

    ● UCT-V: If you select UCT-V as the tapping method, the traffic is acquired from the UCT-Vs installed on the VMs. You must configure the UCT-V Controller to monitor the UCT-Vs.
    ● OVS Mirroring: If you select OVS Mirroring as your tapping method, the traffic is acquired from the UCT-Vs installed on the hypervisors. You must configure the UCT-V Controller to monitor the UCT-Vs.

    Note:  For software release 6.7.00, only OVS Mirroring is supported on RHOSP 17.1 version.

    ● Customer Orchestrated Source: If you selectCustomer Orchestrated Source as the tapping method, you can use tunnels as a source where the traffic is directly tunneled to V Series nodes without deploying UCT-Vs or UCT-V Controllers.

    Projects to Monitor (Only for OVS Mirroring traffic acquisition method)

    This field only appears for OVS Mirroring traffic acquisition method.

    ● Click the Get Project List to view the list of projects.

    Note:  The Get Project List button will only work if all the OpenStack credentials have been provided. Refer to OVS Mirroring Prerequisites.

    ● Select projects that you want to monitor from the list.
    ● You can click Select None to clear existing selections or Select All to add all available projects to the connection configuration.

    Traffic Acquisition Tunnel MTU (Maximum Transmission Unit)

    The Maximum Transmission Unit (MTU) is the maximum size of each packet that the tunnel endpoint can carry from the UCT-V to the GigaVUE V Series node.

    • For GRE, the default value is 1450.
    • For VXLAN, the default value is 1400. However, the UCT-V tunnel MTU should be 50 bytes less than the default MTU size.
  4. Click Save. The OpenStack Fabric Launch Configuration page appears. Refer to Configure GigaVUE Fabric Components in GigaVUE-FM for detailed information.

Note:  If GigaVUE‑FM fails to connect to OpenStack, an error message is displayed specifying the cause of failure. The connection status is also displayed in Audit Logs, refer to Audit logs track the changes and activities that occur in the virtual nodes due to user actions. The logs can be filtered to view specific information. for more information.

Managing Monitoring Domain

You can view the details of the monitoring domain that are created in the list view. The list view details can be viewed based on:

You can also filter the monitoring domain based on a specified criterion. In the monitoring domain page there are two filter options as follows:

■   Right filter - Click the Filter button on the right to filter the monitoring domain based on a specific criterion.
■   Left filter - Click the to filter the monitoring domain based on the domain and connections. You can click + to create a new monitoring domain. This filter once applied also works even when the tabs are swapped.

To edit or delete a specific monitoring domain, select the monitoring domain, click the ellipses .

When you click a monitoring domain, you can view details of it in a split view of the window. In the split view window, you can view the details such as Configuration, Launch Configuration and V Series configuration.

Monitoring Domain

The list view shows the following information in the monitoring domain page:

■   Monitoring Domain
■   Connections
■   Tunnel MTU
■   Acquisition Method
■   Centralized connection
■   Management Network

Note:  Click the to select the columns that should appear in the list view.

Use the following buttons to manage your Monitoring Domain:

Button Description

New

Use to create new connection

Actions

You can select a Monitoring Domain and then perform the following options:

● Edit Monitoring Domain- Select a Monitoring Domain and then click Edit Monitoring Domain to update the configuration.
● Delete Domain - You can select a monitoring domain or multiple monitoring domains to delete them.
● Edit Fabric-You can select one fabric or multiple fabrics of the same monitoring domain to edit a fabric. You cannot choose different fabrics of multiple monitoring domains at the same time and edit their fabrics
● Deploy Fabric - -You can select a monitoring domain to deploy a fabric, you cannot choose multiple monitoring domains at the same time to deploy fabrics. This option is only enabled when there is No FABRIC (launch configuration) for that specific monitoring domain and GigaVUE-FM orchestration is enabled.. You must create a fabric in the monitoring domain, if the option is disabled
● Upgrade Fabric-You can select a monitoring domain or multiple monitoring domains to upgrade the fabric. You can upgrade the V Series nodes using this option.
● Delete Fabric- You can delete all the fabrics associated with the monitoring domain of the selected Fabric.
● Shut down OVS Traffic - You can shut down the OVS traffic. You can view the Shut down OVS Traffic option only when you enable the check box OVS Agent Traffic when V Series unreachable in Advanced Settings. For more information on settings, refer to Configure the OpenStack Settings
● Restart OVS Traffic - You can restart the OVS traffic. You can view the Restart OVS Traffic option only when you enable the check box OVS Agent Traffic when V Series unreachable in Advanced Settings. For more information on settings, refer to Configure the OpenStack Settings
● Edit SSL Configuration - You can use this option to add Certificate Authority and the SSL Keys when using the Secure Tunnels.

Filter

Filters the Monitoring Domain based on the list view options that are configured:

● Tunnel MTU
● Acquisition Method
● Centralised Connection
● Management Subnet

You can view the filters applied on the top of the Monitoring Domain page as a button. You can remove the filters by closing the button.

Connections Domain

To view the connection related details for a monitoring domain, click the Connections tab.

The list view shows the following details:

■   Connections
■   Monitoring Domain
■   Status
■   Fabric Nodes
■   Credential
■   Region

Fabric

To view the fabric related details for a monitoring domain, click the Fabric tab.

The list view shows the following details:

■   Connections
■   Monitoring Domain
■   Fabric Nodes
■   Type
■   Management IP
■   Version
■   Status - Click to view the upgrade status for a monitoring domain.
■   Security groups

UCT-Vs

To view all the UCT-Vs associated with the available monitoring domains click the UCT-Vs tab.

The list view shows the following details:

■   Monitoring Domain
■   IP address
■   Registration time
■   Last hearbeat time
■   Agent mode
■   Status

Refer to Configure the OpenStack Settings, for information regarding Settings.