The Basic Commands
The following table lists each of the top level commands for the GigaVUE‑OS in Configure mode. As described in Entering Commands in the CLI, the commands available in Configure mode are a superset of those available in Standard and Enable modes.
Most commands have multiple supported arguments. You can see the exact arguments available at any point of command entry by typing it into the CLI followed by ?.
|
Command |
Description |
|
aaa |
Configures authentication, authorization, and accounting setting |
|
apps |
Enables access to Gigamon Applications, such as Application Session Filtering (ASF), GTP backup, GTP whitelisting, inline SSL decryption, keystore, NetFlow, SIP whitelisting, and Passive SSL decryption. GigaSMART applications are not supported on GigaVUE TA Series. |
|
banner |
Sets a node login banner. |
|
bond |
Configures bonded interface settings. |
|
boot |
Configures node boot parameters. |
|
card |
Configures a line card or module. |
|
chassis |
Configures the GigaVUE H Series chassis. |
|
clear |
Resets statistics or clears caches. |
|
cli |
Configures CLI shell options. |
|
clock |
Sets the node clock or timezone. |
|
cluster |
Configures a cluster of connected GigaVUE‑OS nodes. |
|
configuration |
Manages configuration files. |
|
configure |
Enters Configure mode. |
|
coreboot |
Upgrades the BIOS image on GigaVUE-TA100 and GigaVUE‑HC1. |
|
crypto |
Manages X.509 certificates for the GigaVUE H Series node’s Web server. |
|
debug |
Generates a dump file for use in debugging issues with Gigamon Technical Support. |
|
disable |
Exits Enable mode and returns to Standard mode. |
|
|
Configures email and event notification via email. |
|
enable |
Enters Enable mode. |
|
exit |
Exits Configure mode and returns to Enable mode or logs out of the CLI. |
|
file |
Manages TCP and debug dump files on disk. |
|
filter-template |
Configures flexible filter templates on GigaVUE‑HC3 and GigaVUE-TA100. |
|
gigasmart |
Configures an interface address to a GigaSMART card or module. |
|
gigastream |
Configures a GigaStream—a group of ports acting as a single addressable tool port destination or stack-link. |
|
gsgroup |
Configures a GigaSMART group consisting of one or more internal GigaSMART ports. |
|
gsop |
Configures a GigaSMART operation consisting of one or more advanced processing applications. |
|
gsparams |
Configures GigaSMART parameters. |
|
halt |
Shuts down the node without powering it off. |
|
hb-profile |
Configures a heartbeat profile on GigaVUE HC Series nodes. |
|
help |
Views a description of the interactive help system. |
|
hostname |
Specifies the node's hostname. The hostname appears in the system prompt and in SNMP traps. |
|
ib-pathway |
Reserved for future use. |
|
image |
Manages node software images. |
|
inline-network |
Configures an inline network on GigaVUE HC Series nodes. |
|
inline-network-group |
Configures an inline network group on GigaVUE HC Series nodes. |
|
inline-serial |
Configures an inline tool series on GigaVUE HC Series nodes. |
|
inline-tool |
Configures an inline tool on GigaVUE HC Series nodes. |
|
inline-tool-group |
Configures an inline tool group on GigaVUE HC Series nodes. |
|
interface |
Configures network interfaces. |
|
ip |
Configures IP settings for the eth0 Mgmt port. |
|
ipv6 |
Configures IPv6 settings for the eth0 Mgmt port. |
|
job |
Configures scheduled jobs. |
|
ldap |
Configures LDAP server settings for authentication. |
|
license |
Activates features using license keys. Licensing is used for GigaSMART, Port, or Advanced Features License. |
|
logging |
Configures event logging. |
|
map |
Configures maps and map rules to manage GigaVUE traffic distribution. |
|
map-group |
Configures map groups for GTP forward listing and GTP flow sampling. |
|
map-passall |
Creates a pass-all map to send all traffic on a network port to a tool port irrespective of the other packet distribution in place on the port. |
|
map-scollector |
Configures shared collector map parameters. |
|
map-template |
Configures a map template. |
|
nhb-profile |
Configures a negative heartbeat on GigaVUE HC Series nodes. |
|
no |
Deletes or clears certain configuration options. |
|
notifications |
Configures notification settings. |
|
ntp |
Enables and disables the use of NTP, as well as adds NTP servers. |
|
ntpdate |
Sets node clock once from a remote server using NTP. |
|
ping |
Sends ICMP echo requests to a specified host. |
|
ping6 |
Sends IPMPv6 echo requests to a specified IPv6 host. |
|
pld |
Upgrades programmable logic devices (PLDs) on GigaVUE‑HC3 nodes. |
|
policy |
Configures an Active Visibility policy. |
|
port |
Configures port type, parameters, and filters. |
|
port-group |
Creates a group of ports. |
|
port-pair |
Configures a port-pair on a pair of network ports within the same GigaVUE H Series node. A port-pair is a bidirectional connection in which traffic arriving on one port in the pair is transmitted out the other (and vice-versa) as a pass-through TAP. |
|
ptp |
Enables and disables the use of PTP. |
|
radius-server |
Configures RADIUS server settings for authentication. |
|
redundancy-profile |
Configures an inline redundancy profile on GigaVUE HC Series nodes. |
|
reload (reboot) |
Reboots or shuts down the node. |
|
reset |
Resets specified portions of the node configuration to their factory states. |
|
serial |
Sets options for the serial console port. |
|
sfp |
Reserved for future use. |
|
show |
Displays configuration and status information for GigaVUE H Series settings and entities. |
|
sleep |
Sleeps for a specified number of seconds. |
|
snmp-server |
Configures SNMP settings, including the local SNMP server, notification events, and notification destinations. |
|
spine-link |
Configures spine links in a cluster with a leaf and spine architecture. |
|
ssh |
Enables and disables SSH access, as well as manages settings. |
|
stack-link |
Configures a stack-link between two GigaVUE H Series nodes in a cluster. Stack-links are used to carry data traffic between nodes in a GigaVUE H Series cluster. |
|
sync |
Enables dynamic control card synchronization for a GigaVUE-HD8 node. |
|
system |
Changes system settings. |
|
system-health |
Configures system health behaviors. |
|
tacacs-server |
Configures TACACS+ server settings for authentication. |
|
terminal |
Sets terminal parameters, including width and length. |
|
timestamp |
Configures the timestamp source. |
|
tool-mirror |
Configures a tool-mirror connection between two tool ports. A tool-mirror connection sends all packets arriving on one tool port to a second tool port on the same node. |
|
traceroute |
Traces the route packets take to a destination. |
|
tunnel |
Reserved for future use. |
|
tunnel-endpoint |
Configures a tunnel endpoint, which is a destination for load balanced traffic from a L2GRE encapsulation tunnel. |
|
tunneled-port |
Configures a tunnel port to be used for GigaSMART encapsulation/decapsulation operations. |
|
uboot |
Installs new uboot software. |
|
username |
Manages user accounts. |
|
vport |
Configures a virtual port. |
|
web |
Configures the Web server used for GigaVUE‑FM GUI support on the GigaVUE H Series node. |
|
write |
Saves the running configuration to persistent storage. |
