map

Specifies the name of the map. The alias must be unique and can contain up to 128 characters. Aliases are case-sensitive.

For example:

(config) # map alias map1

(config map alias map1) #

The following are reserved keywords that cannot be used in map aliases with any character case:

For example, using these keywords in a map alias displays an error message:

% Invalid alias 'Rule'. 'Rule' is a reserved word.

or

% Invalid alias 'MAP'. 'MAP' is a reserved word.

For flexible inline arrangements, specifies the sequence of inline tools or inline tool groups through which the traffic will be guided between the respective inline network ports, as follows:

Separate each alias with a comma. For example:

(config map alias flexmap1) # a-to-b IT1,IT2,IT3,IT4

For flexible inline arrangements, specifies the sequence of inline tools or inline tool groups through which the traffic will be guided between the respective inline network ports, as follows:

Separate each alias with a comma. For example:

config# map alias flexmap2 # b-to-a IT3,IT4,IT1,IT2

Supplies an optional comment for this map. The comment will appear in show map output. For example:

(config map alias map1) # comment “to SanFran”

Enables the specified map.

Maps with rules can be enabled or disabled. For all map enable and disable actions, only regular maps and first level maps are supported. Other maps (such as map-passall, second level maps, and inline maps) are not supported.

When a map is disabled, traffic is not passed to the tool ports.

When a map is disabled, the map rules are still present, but the map is marked as disabled. Map rules consume resources even if the map the disabled.

Map statistics are not updated when a map is disabled.

For example:

(config) # map alias map1 enable

Enables the encap tunnel configuration in a specified map.

For example:

(config) # map alias encap-tunnel encap1

Configures map rules for GTP correlation. The arguments are as follows:

To specify version, use the following:

To specify EPC interfaces, use the following:

Note:  Version and interface cannot be specified in the same flowrule.

Examples:

(config) # map alias map1 flowrule add pass gtp imsi 21345*

(config) # map alias map1 flowrule add pass gtp imsi 21345* interface S5

(config) # map alias map1 flowrule add drop gtp imsi 21345* version 1

The maximum number of GTP flowrules is 32 per map (16 pass and 16 drop rules).

The procedure for creating a GTP flowrule for specified IMSIs is as follows:

Create a GigaSMART group and associate it with one or more GigaSMART engine ports. For example:

(config) # gsgroup alias gsg1 port-list 1/1/e1

Create a GigaSMART operation using flow-ops flow-filtering gtp and assign it to the GigaSMART group. For example:

(config) # gsop alias gtp_sf flow-ops flow-filtering gtp port-list gsg1

Create a GigaSMART virtual port and assign it to the same GigaSMART group. For example:

(config) # vport alias vp1 gsgroup gsg1

Create a first level map directing GTP traffic from physical network ports to the virtual port created in the previous step. For example:

(config) # map alias to_vp

(config map alias to_vp) # type firstLevel byRule

(config map alias to_vp) # to vp1

(config map alias to_vp) # from 1/1/x3

(config map alias to_vp) # rule add pass portsrc 2123

(config map alias to_vp) # rule add pass portsrc 2152

(config map alias to_vp) # exit

Create a second level map that takes traffic from the GigaSMART virtual port, applies the flow-ops GigaSMART operation, matches IMSIs specified by a flowrule, and sends matching traffic to physical tool ports. For example:

map alias IMSI-list1

(config map alias IMSI-list1) # type secondLevel flowFilter

(config map alias IMSI-list1) # use gsop gtp_sf

(config map alias IMSI-list1) # to 1/1/x4

(config map alias IMSI-list1) # from vp1

(config map alias IMSI-list1) # flowrule add pass gtp imsi 22222222222223*

(config map alias IMSI-list1) # exit

Refer to the “GigaSMART GTP Correlation” section in the GigaVUE Fabric Management Guide for more information.

Configures map rules for GTP rotational flow sampling. The arguments are as follows:

Configures map rules for GTP flow sampling. The arguments are as follows:

Note:  Version and interface cannot be specified in the same flowsample rule.

Examples:

(config) # map alias map1 flowsample add gtp imsi 21345* percentage 30

(config) # map alias map1 flowsample add gtp imsi 21345* interface Gn percentage 30

(config) # map alias map1 flowsample add gtp imsi 21345* imei 66* version 2 percentage 30

(config) # map alias map1 flowsample add gtp apn *ims* percentage 50

(config) # map alias map1 flowsample add gtp apn *ims* qci 5 percentage 50

You can put IMEI, IMSI, and MSISDN numbers in a single rule. The rule will only be matched if the IMEI, IMSI, and MSISDN match.

(config) # map alias map1 flowsample delete gtp all

(config) # map alias map1 flowsample delete gtp priority-id 2

Examples:

(config) # map alias map1 flowsample insert after 12 gtp imsi 22345* percentage 70

(config) # map alias map1 flowsample insert after 12 gtp imsi 22345* interface S10 percentage 70

(config) # map alias map1 flowsample insert before 11 gtp imsi 22345* version 1 percentage 70

Note:  When a flowsample rule is inserted, it will appear as an addition in the output of the running configuration.

Note:  The maximum number of GTP flowsample rules is 20 per map. Up to ten (10) flow sampling maps can be configured per vport.

Refer to the “GigaSMART GTP Whitelisting and GTP Flow Sampling” section in the GigaVUE Fabric Management Guide for more information.

Configures map rules for 5G flow sampling. The arguments are as follows:

Configures map rules for 5Gb flow sampling. The arguments are as follows:

Note:  Version and interface cannot be specified in the same flowsample rule.

Examples:

(config) # map alias map1 flowsample add 5G nci f12345678 percentage 100

(config) # map alias map1 flowsample delete 5G all

Examples:

(config) # map alias map1 flowsample insert after 5G imsi nci f12345678 percentage 100

Note:  When a flowsample rule is inserted, it will appear as an addition in the output of the running configuration.

Refer to the “GigaSMART 5G Whitelisting and 5G Flow Sampling” section in the GigaVUE Fabric Management Guidefor more information.

Configures map rules for SIP flow sampling. The arguments are as follows:

(config) # map alias map1 flowsample add sip caller-id * percentage 50

(config) # map alias map1 flowsample delete sip all

(config) # map alias map1 flowsample delete sip priority-id 2

(config) # map alias map1 flowsample insert after 12 sip caller-id * percentage 50

Note:  The maximum number of SIP flowsample rules is 20 per map.

Refer to “GigaSMART SIP/RTP Correlation” in the GigaVUE Fabric Management Guide for details and examples.

Specifies the source(s) for packets matching this map. Use one of the following:

Note:  You can add a maximum of 324 ports, if the ports are not attached to a GigaStream.

Refer to the “Associating Inline Networks with Inline Tools Using Inline Maps” section in the GigaVUE Fabric Management Guide for details on inline-network-alias and inline-network-group-alias.

For example:

(config) # map alias map1 from port1

Adds or deletes a gsrule (GigaSMART rule). GigaSMART rules use Adaptive Packet Filtering to match specified packets in a second level map receiving traffic from a GigaSMART virtual port (vport). The overall procedure for creating a gsrule is as follows:

(config) # gsgroup alias gsg1 port-list 1/1/e1

(config) # gsop alias gsfil apf set port-list gsg1

(config) # vport alias vp1 gsgroup gsg1

(config) # map alias to_vp

(config map alias to_vp) # type firstLevel byRule

(config map alias to_vp) # to vp1

(config map alias to_vp) # from 1/1/x3

(config map alias to_vp) # rule add pass ethertype 8906

(config map alias to_vp) # exit

map alias m1

(config map alias m1) # type secondLevel byRule

(config map alias m1) # use gsop gsfil

(config map alias m1) # to 1/1/x1

(config map alias m1) # from vp1

(config map alias m1) # gsrule add pass pmatch string "\xff\xff\xfe" 29

(config map alias m1) # exit

Note:  The maximum number of gsrules that can be specified in a map is 5.

Refer to the “GigaSMART Adaptive Packet Filtering (APF)” section for more information.

Specifies what to do with traffic that does not match any rule in a map that only has drop rules. This argument changes the default behavior of drop to pass in a drop-only map.

If you do not use this argument and there are only drop rules in a map, the default behavior is that all traffic not matching the rules will be dropped, or, if a shared collector is configured, traffic will be sent to the shared collector.

However, if you use this argument and there are only drop rules in a map, traffic will be passed rather than dropped. For example:

(config) # map alias m1

(config map alias m1) # type regular byRule

(config map alias m1) # from 1/1/x1

(config map alias m1) # to 2/1/x2

(config map alias m1) # rule add drop ipver 4

(config map alias m1) # no-rule-match pass

(config map alias m1) # exit

When managing map rule resources, note that using this argument consumes one extra map rule.

For flexible inline arrangements, configures an out-of-band (OOB) map by copying from a flexible inline map as follows:

Note:  All sources of an OOB copy configuration must be a member of the flexible inline map, either an inline network in the from parameter or a single member of the a-to-b or b-to-a inline tool list.

For example:

(config) # map alias flexmap oob-copy from iN1 dir a-to-b to it1 tag as-inline

Specifies an option to pass GTP control traffic (GTP-c) to all GigaSMART engines in a GTP engine group. A GTP engine group has multiple GigaSMART engine port members.

For example:

(config) # map alias to_vp_ctrl param traffic control

Refer to “GTP Engine Grouping” section in the GigaVUE Fabric Management Guide for details. Also refer to the “GigaSMART GTP Correlation” and the “GigaSMART GTP Whitelisting and GTP Flow Sampling” sections in the GigaVUE Fabric Management Guide.

Sets the priority of the map relative to other maps. A packet matching multiple maps is sent to the map with the highest priority.

For example:

(config) # map alias map1 priority before map2

Assigns a user role to a map access list or replaces a map access list.

For example:

(config) # map alias map1 roles assign monitor to listen_roles

Adds map rules (drop or pass), as follows:

add—Creates a new pass rule.

drop—Creates a new drop rule. Packets matching drop rules are dropped immediately without being sent to any configured shared collector or compared to any pass rules.

Within a map, drop rules have precedence over pass rules. So, if a packet matches both a pass and a drop rule in the same map, the packet is dropped rather than passed.

Both pass and drop rules have a wide variety of packet-matching criteria available, including MAC/IP addresses, application ports, VLAN IDs, and so on. Refer to map rule for rule criteria details.

For example:

(config) # map alias map1

(config map alias map1) # from 1/1/q1

(config map alias map1) # to 1/1/q2

(config map alias map1) # rule add pass vlan 100 comment “comment for rule”

(config map alias map1) # comment “comment for whole template”

(config map alias map1) # exit

Copies map rules from a template to create a map.

For example,

(config) # map alias map1

(config map alias map1) # from 1/1/q1

(config map alias map1) # to 1/1/q2

(config map alias map1) # rule copy-from template my_rule_template

(config map alias map1) # exit

Deletes map rules, as follows:

(config) # map alias add_header_1 rule delete rule-id ?<Integer> Rule Id13101112

You can also obtain the rule ID using the following command and pressing the Tab key after the rule-id keyword. For example:

(config) # map alias add_header_1 rule delete rule-id1 3 10 11 12

(config) # map alias add_header_1 rule delete rule-id 1

(config) # map alias add_header_1 rule delete rule-id 1,3,10

(config) # map alias add_header_1 rule delete rule-id 10..12

(config) # map alias add_header_1 rule delete rule-id 1,3,10..12

You can also obtain the rule ID for a specified map rule with the show map alias <alias> command.

Edits a specified map rule in a map by rule-id.

You can obtain the rule ID using the following command and typing the question mark (?) after the rule-id keyword. For example:

(config) # map alias dedup_1 rule edit rule-id ?<Integer> Rule Id12

You can also obtain the rule ID using the following command and pressing the Tab key after the rule-id keyword. For example:

(config) # map alias dedup_1 rule edit rule-id1 2

Once you have the rule-id, the following can be edited:

Refer to map rule for rule criteria details.

Maps with a subtype of ol, for overlap, such as flowSample-ol or flowWhitelist-ol, do not support map editing.

For flexible inline arrangements, configures an external VLAN tag for a flexible inline map, as follows:

The tag value is unique to each flexible inline map.

For example:

(config) # map alias flexmap1 tag 100

For MAC Address rewrite ,configure the destination and Source fields as follows:

To unconfigure MAC Address rewrite for map based configuration use the below:

To delete a rule based MAC address re-write utilize the rule edit or delete command.

For IP Address rewrite, configure the destination and Source fields as follows:

Note:  The IP addresses 0.0.0.0, 255.255.255.255, and multicast are not accepted.

To unconfigure IP Address rewrite for map based configuration use the below:

To delete a rule based IP address re-write utilize the rule edit or delete command.

For VLAN manipulation, configure a VLAN ID and TPID value as follows:

To unconfigure VLAN manipulation for map-based configuration use the below:

Specifies the destination(s) for packets matching this map. Use one of the following:

Refer to the “Associating Inline Networks with Inline Tools Using Inline Maps” section in the GigaVUE Fabric Management Guide for details on inline-tool-alias, inline-tool-group-alias, inline-serial-alias, and bypass.

For example:

(config) # map alias map1 to 2/1/x1

Attaches the tunnel created for encapsulating the traffic.

For example:

(config map alias <map-name>) # encap-tunnel <tunnel-alias>

To attach an encap-tunnel, ensure that you configure at least one circuit port in the to parameter.

Specifies the map type, as follows:

Also specifies the optional map subtype, as follows:

For example:

(config) # map alias map1 type inline byRule

Includes a named GigaSMART operation as part of this map, applying the associated GigaSMART functionality to packets matching any rule in the map (for example, slicing, de-duplication, header stripping, and so on).

Note:  Important— GigaSMART operations must be added to the map before destination ports (to).

This option is only available on nodes or clusters with GigaSMART features available and licensed.

Refer to the “Working with GigaSMART Operations” section in the GigaVUE Fabric Management Guide for details on creating GigaSMART operations.

For example:

(config) # map alias map1 use gsop gsfilter

Adds or deletes a rule in a forward list map as follows:

Note:  By default, SUPI or IMSI is value is used for the DB lookup, if no type is configured.

To specify an APN, use a pattern, with or without a wildcard prefix or suffix, up to a maximum of 100 case-insensitive characters, as well as period (.), hyphen (-), and wildcard (*). APN is not supported on GigaVUE-HB1.

To specify version, use the following:

To specify EPC interfaces, use the following:

Note:   

For example:

(config) # map alias map1 whitelist add gtp version 1

(config) # map alias map2 whitelist add gtp interface S5

Note that in the examples above, map1 and map2 would have to be associated with two different gsgroups.

Other examples:

(config) # map alias map3 whitelist add gtp apn *mobile.com*

(config) # map alias map1 whitelist delete all

Refer to the “GigaSMART GTP Whitelisting and GTP Flow Sampling” section in the GigaVUE Fabric Management Guide for more information.

Adds a rule in a forward list map as follows:

For example:

config) # map alias sip-whitelist-map add sip type ip-addr

Refer to the “GigaSMART GTP Whitelisting and GTP Flow Sampling” section in the GigaVUE Fabric Management Guide for more information.

# show map

# show map access

# show map alias map1

# show map all

# show map assignment

# show map assignment alias map1

# show map brief

# show map mode

# show map priority

# show map priority alias map1

# show map stats alias map1

# show map stats alias map1 rule 2

# show map stats all

# show map-flexinline

# show map-flexinline alias FLEX1

# show map-flexinline all

(config) # no map alias mymap

(config) # no map alias mymap comment

(config) # no map alias mymap enable

(config) # no map alias mymap from

(config) # map alias mymap from 1/1/x1

(config) # no map alias mymap no-rule-match pass

(config) # no map alias mymap param traffic control

(config) # no map alias mymap roles assign monitor

(config) # no map alias mymap roles assign all

(config) # no map alias mymap to

(config) # no map alias mymap use gsop

(config) # no map all

(config)# no rewrite-dstmac | no rewrite-srcmac

(config)# no rewrite-dstip | no rewrite-srcip