Filter Fabric Statistics

Using filters, you can search and narrow down the ports displayed in the Fabric Statistics page. To filter the fabric statistics, click Filter. A filter quick view appears as shown in 1 Fabric Statistics Filter. Specify the criteria to filter the ports.

1 Fabric Statistics Filter

The criteria that you can use to filter the fabric statistics is as follows:

Criteria

Description

Box/Slot ID

Displays only those ports that match the specified box and slot IDs.

Port Alias

Displays a port with specified alias.

Port ID

Displays ports with specified port ID. For example, if you specify 3 as the port ID, the result will display ports that include the number 3, 13, 23, 30, and so on.

Type

Displays ports with specified port type. Select one of the following:

■   Network
■   Tool
■   Inline Network
■   Circuit port
■   Inline Tool
■   GigaSMART
■   Hybrid
■   Stack
■   Backplane
■   XAUII

Packet Drops/Errors

Displays only those ports with packet drops or errors or both. Select one of the following:

■   All — displays ports with both packet drops and errors. This is the default.
■   Drops — displays ports with only packet drops.
■   Errors — displays ports with only packet errors.
■   Any — displays ports with either packet drops or packet errors.

Clear Fabric Statistics Counters

To clear the fabric statistics counters:

  1. Select the required port ids for which you need to clear the counters.
  2. Click Clear. A confirmation message pops-up asking if the statistical counters must be cleared for the selected port ids.
  3. Click Ok.