The Basic Commands

The following table lists each of the top level commands for the GigaVUE‑OS in Configure mode. As described in Entering Commands in the CLI, the commands available in Configure mode are a superset of those available in Standard and Enable modes.

Most commands have multiple supported arguments. You can see the exact arguments available at any point of command entry by typing it into the CLI followed by ?.

Table 1: CLI Commands

Command

Description

aaa

Configures authentication, authorization, and accounting setting

apps

Enables access to Gigamon Applications, such as Application Session Filtering (ASF), GTP backup, GTP whitelisting, inline SSL/TLS decryption, keystore, NetFlow, SIP whitelisting, and Passive SSL decryption. GigaSMART applications are not supported on the GigaVUE TA Series.

banner

Sets a node login banner.

bond

Configures bonded interface settings.

boot

Configures node boot parameters.

card

Configures a line card or module.

chassis

Configures the GigaVUE HC Series chassis.

clear

Resets statistics or clears caches.

cli

Configures CLI shell options.

clock

Sets the node clock or timezone.

cluster

Configures a cluster of connected GigaVUE‑OS nodes.

configuration

Manages configuration files.

configure

Enter Configure mode.

coreboot

Installs new core boot software.

crypto

Manages X.509 certificates for the GigaVUE HC Series node’s Web server.

debug

Generates a dump file for use in debugging issues with Gigamon Technical Support.

disable

Exits Enable mode and returns to Standard mode.

email

Configures email and event notification via email.

enable

Enters Enable mode.

exit

Exits Configure mode and returns to Enable mode or logs out of the CLI.

file

Manages TCP and debug dump files on disk.

filter-template

Configures flexible filter templates on GigaVUE‑HC3 and GigaVUE-TA100.

gigasmart

Configures an interface address to a GigaSMART card or node.

gigastream

Configures a GigaStream—a group of ports acting as a single addressable tool port destination or stack-link.

gsgroup

Configures a GigaSMART group consisting of one or more internal GigaSMART ports.

gsop

Configures a GigaSMART operation consisting of one or more advanced processing applications.

gsparams

Configures GigaSMART parameters.

halt

Shuts down the node without powering it off.

hb-profile

Configures a heartbeat profile on GigaVUE HC Series nodes.

help

Views a description of the interactive help system.

hostname

Specify the node's hostname. The hostname appears in the system prompt and in SNMP traps.

ib-pathway

Reserved for future use.

image

Manages node software images.

inline-network

Configures an inline network on GigaVUE HC Series nodes.

inline-network-group

Configures an inline network group on GigaVUE HC Series nodes.

inline-netlag

Configure Inline-Netlag.

inline-serial

Configures an inline tool series on GigaVUE HC Series nodes.

inline-tool

Configures an inline tool on GigaVUE HC Series nodes.

inline-tool-group

Configures an inline tool group on GigaVUE HC Series nodes.

interface

Configures network interfaces.

ip

Configures IP settings for the eth0 Mgmt port.

ipv6

Configures IPv6 settings for the eth0 Mgmt port.

job

Configures scheduled jobs.

ldap

Configures LDAP server settings for authentication.

license

Activates features using license keys. Licensing is used for GigaSMART, Port, or Advanced Features License.

logging

Configures event logging.

map

Configures maps and map rules to manage GigaVUE HC Series traffic distribution.

map-group

Configures map groups for GTP forward listing and GTP flow sampling.

map-passall

Creates a pass-all map to send all traffic on a network port to a tool port irrespective of the other packet distribution in place on the port.

map-scollector

Configures shared collector map parameters.

map-template

Configures a map template.

nhb-profile

Configures a negative heartbeat on GigaVUE HC Series nodes.

no

Deletes or clears certain configuration options.

notifications

Configures notification settings.

ntp

Enables and disables the use of NTP, as well as adds NTP servers.

ntpdate

Sets node clock once from a remote server using NTP.

ping

Sends ICMP echo requests to a specified host.

ping6

Sends IPMPv6 echo requests to a specified IPv6 host.

pld

Upgrades programmable logic devices (PLDs) on GigaVUE‑HC3 nodes.

policy

Configures an Active Visibility policy.

port

Configures port type, parameters, and filters.

port-group

Creates a group of ports.

port-pair

Configures a port-pair on a pair of network ports within the same GigaVUE HC Series node. A port-pair is a bidirectional connection in which traffic arriving on one port in the pair is transmitted out the other (and vice-versa) as a pass-through TAP.

ptp

Enables and disables the use of PTP.

radius-server

Configures RADIUS server settings for authentication.

redundancy-profile

Configures an inline redundancy profile on GigaVUE HC Series nodes.

reload (reboot)

Reboots or shuts down the node.

rename

Renames the map alias.

reset

Resets specified portions of the node configuration to their factory states.

serial

Sets options for the serial console port.

sfp

Reserved for future use.

sffp

Configure Subscriber Flow Forwarding Protocol profile

show

Displays configuration and status information for GigaVUE HC Series settings and entities.

sleep

Sleeps for a specified number of seconds.

snmp-server

Configures SNMP settings, including the local SNMP server, notification events, and notification destinations.

spine-link

Configures spine links in a cluster with a leaf and spine architecture.

ssh

Enables and disables SSH access, as well as manages settings.

stack-link

Configures a stack-link between two GigaVUE HC Series nodes in a cluster. Stack-links are used to carry data traffic between nodes in a GigaVUE HC Series cluster.

sync

Enables dynamic control card synchronization for a GigaVUE HC Series node.

system

Changes system settings.

system-health

Configures system health behaviors.

tacacs-server

Configures TACACS+ server settings for authentication.

tcpdump

Display packets on a network.

terminal

Sets terminal parameters, including width and length.

timestamp

Configures the timestamp source.

tool-mirror

Configures a tool-mirror connection between two tool ports. A tool-mirror connection sends all packets arriving on one tool port to a second tool port on the same node.

traceroute

Traces the route packets take to a destination.

tunnel

Reserved for future use.

tunnel-endpoint

Configures a tunnel endpoint, which is a destination for load-balanced traffic from an L2GRE encapsulation tunnel.

tunneled-port

Configures a tunnel port to be used for GigaSMART encapsulation/decapsulation operations.

uboot

Installs new uboot software.

username

Manages user accounts.

vport

Configures a virtual port.

web

Configures the Web server used for GigaVUE‑FM GUI support on the GigaVUE HC Series node.

write

Saves the running configuration to persistent storage.