Create Ingress and Egress Tunnel (Nutanix)
Traffic from the GigaVUE V Series Node is distributed to tunnel endpoints in a monitoring session. A tunnel endpoint can be created using a standard L2GRE, VXLAN, or ERSPAN tunnel.
To create a new tunnel endpoint:
- After creating a new monitoring session, or click Edit on an existing monitoring session, the GigaVUE-FM canvas appears.
- In the canvas, select New > New Tunnel, drag and drop a new tunnel template to the workspace. The Add Tunnel Spec quick view appears.
- On the New Tunnel quick view, enter or select the required information as described in the following table.
Field
Description
Alias
The name of the tunnel endpoint.
Note: Do not enter spaces in the alias name.
Description
The description of the tunnel endpoint.
Type
The type of the tunnel.
Select ERSPAN, or L2GRE, or VXLAN to create a tunnel.
VXLAN Traffic Direction
The direction of the traffic flowing through the GigaVUE V Series Node.
In
Choose In (Decapsulation) for creating an Ingress tunnel, traffic from the source to the GigaVUE V Series Node.
IP Version
The version of the Internet Protocol. Select IPv4 or IPv6.
Remote Tunnel IP
For Ingress tunnel, Remote Tunnel IP is the IP address of the tunnel source.
VXLAN Network Identifier
Unique value which is used to identify the VXLAN. The value ranges from 1 to 16777215.
Source L4 Port
Port from which the connection will be established to the target. For Example, if A is the source and B is the destination, this port value belongs to A.
Destination L4 Port
Port to which the connection will be established from the source. For Example, if A is the source and B is the destination, this port value belongs to B.
Out
Choose Out (Encapsulation) for creating an Egress tunnel from the V Series node to the destination endpoint.
Remote Tunnel IP
For Egress tunnel, Remote Tunnel IP is the IP address of the tunnel destination endpoint.
MTU
The Maximum Transmission Unit (MTU) is the maximum size of each packet that the tunnel endpoint can carry. The default value is 1500.
Time to Live
Enter the value of the time interval for which the session needs to be available. The value ranges from 1 to 255. The default value is 64.
DSCP
Differentiated Services Code Point (DSCP) are the values, which network devices use to identify traffic to be handled with higher or lower priority. The values ranges from 0 to 63 with 0 being the highest priority and 63 as the lowest priority.
Flow Label
Unique value which is used to identify packets that belong to the same flow. A flow is a sequence of packets that need to be treated as a single entity that may require special handling. Accepted value is between 0 and 1048575
VXLAN Network Identifier
Unique value which is used to identify the VXLAN. The value ranges from 1 to 16777215.
Source L4 Port
Port from which the connection will be established to the target. For Example, if A is the source and B is the destination, this port value belongs to A.
Destination L4 Port
Port to which the connection will be established from the source. For Example, if A is the source and B is the destination, this port value belongs to B.
L2GRE Traffic Direction
The direction of the traffic flowing through the GigaVUE V Series Node.
In
Choose In (Decapsulation) for creating an Ingress tunnel, traffic from the source to the GigaVUE V Series Node.
IP Version
The version of the Internet Protocol. Select IPv4 or IPv6.
Remote Tunnel IP
For Ingress tunnel, Remote Tunnel IP is the IP address of the tunnel source.
Key
Identifier used to differentiate different UPDGRE/L2GRE tunnels. It is used to route the encapsulated frames to the appropriate tunnel on the remote endpoint. Enter value between 0 and 4294967295.
Out
Choose Out (Encapsulation) for creating an Egress tunnel from the V Series node to the destination endpoint.
Remote Tunnel IP
For Egress tunnel, Remote Tunnel IP is the IP address of the tunnel destination endpoint.
MTU
The Maximum Transmission Unit (MTU) is the maximum size of each packet that the tunnel endpoint can carry. The default value is 1500.
Time to Live
Enter the value of the time interval for which the session needs to be available. The value ranges from 1 to 255. The default value is 64.
DSCP
Differentiated Services Code Point (DSCP) are the values, which network devices use to identify traffic to be handled with higher or lower priority. The values ranges from 0 to 63 with 0 being the highest priority and 63 as the lowest priority.
Flow Label
Unique value which is used to identify packets that belong to the same flow. A flow is a sequence of packets that need to be treated as a single entity that may require special handling. Accepted value is between 0 and 1048575.
Key
Identifier used to differentiate different UPDGRE/L2GRE tunnels. It is used to route the encapsulated frames to the appropriate tunnel on the remote endpoint. Enter value between 0 and 4294967295.
ERSPAN Traffic Direction
The direction of the traffic flowing through the GigaVUE V Series Node.
In IP Version
The version of the Internet Protocol. Select IPv4 or IPv6.
Remote Tunnel IP
For Ingress tunnel, Remote Tunnel IP is the IP address of the tunnel source.
Flow ID
The ERSPAN flow ID is a numerical identifier that distinguishes different ERSPAN sessions or flows. The value ranges from 1 to 1023.
TLS-PCAPNG Traffic Direction
The direction of the traffic flowing through the GigaVUE V Series Node.
In IP Version
The version of the Internet Protocol. only IPv4 is supported.
Remote Tunnel IP
For Ingress tunnel, Remote Tunnel IP is the IP address of the tunnel source.
MTU
The Maximum Transmission Unit (MTU) is the maximum size of each packet that the tunnel endpoint can carry. The default value is 1500.
Time to Live
Enter the value of the time interval for which the session needs to be available. The value ranges from 1 to 255. The default value is 64.
DSCP
Differentiated Services Code Point (DSCP) are the values, which network devices use to identify traffic to be handled with higher or lower priority. The values ranges from 0 to 63 with 0 being the highest priority and 63 as the lowest priority.
Flow Label
Unique value which is used to identify packets that belong to the same flow. A flow is a sequence of packets that need to be treated as a single entity that may require special handling. Accepted value is between 0 and 1048575
Source L4 Port
Port from which the connection will be established to the target. For Example, if A is the source and B is the destination, this port value belongs to A.
Destination L4 Port
Port to which the connection will be established from the source. For Example, if A is the source and B is the destination, this port value belongs to B.
Cipher
Only SHA 256 is supported.
TLS Version
Only TLS Version1.3.
Selective Acknowledgments
Enable to receive the acknowledgments.
Sync Retries
Enter the value for number of times the sync has to be tried. The value ranges from 1 to 6.
Delay Acknowledgments
Enable to receive the acknowledgments when there is a delay.
- Click Save.
To delete a tunnel, select the required tunnel and click Delete.