Configure GCB Settings

You can configure and edit the following GCB settings in GigaVUE-FM:

■   General Settings
■   SBI Settings
■   Diameter Settings

General Settings

In the General Settings, you can view the following details in a list view:

■   Monitoring Domain
■   Connection GCB UUID
■   Name
■   IP Address
■   Group- For GCB, use a different group name while registering GCB HTTP pod.
■   Status - In the General settings, you can also specify the purge interval to automatically remove the settings that are disconnected for a long duration.

To view or edit the general settings:

1.   In GigaVUE-FM, navigate to Inventory > CONTAINER > Gigamon Container Broker Settings > Settings, the Settings page appears. From the Settings page, on the General section, you can view details of the monitoring domain that are configured in GCB.
2. Click a GCB UUID, and the wizard provides a split view of the following details :
o   General Settings
o   SBI
o   Diameter Settings
o   Thresholds
3. Click on the General Settings, and click Edit to edit/view the following individual settings:
o   Log level
o   Log File Size
o   PCAP File Generation
o   Number of PCAP files generated
o   Tool MTU
o   Interface MTU (read-only value)
o   Tunnel Keepalive
  • You can choose to enable or disable the Tool MTU option for individual GCB or a GCB group:
    1. Enable - If enabled, GigaVUE‑FM will segment the packets received by the configured pods before sending them to the tool.
    2. Disable - If disabled, the packet segmentation will not happen, and the packets will be forwarded to the tool in their actual state.
  • GigaVUE‑FM will display a default Interface MTU value, and you cannot edit this value. Interface MTU value provides information about the platform's infrastructure MTU value. You cannot change the platform MTU value; hence, a read-only value will be displayed. The Tool MTU value should always be less than the Interface MTU value. For more details on Tool MTU value, refer to Configure Traffic Policy.
  • The Tunnel Keepalive function helps to keep the sessions on V Series Node alive when there is no traffic. You can choose to enable or disable the Tunnel Keepalive option for individual GCB or a GCB group:
    1. Enable - If enabled, keepalive packets will be sent to the tool to check if the tool can process the data packets. Keepalive packets will be sent at periodic intervals of one second.
    2. Disable - If disabled, keepalive packets will not be sent to the tool.
4. . Click Save to save the changes made on the General Settings.

Note:  To apply all the settings to the members of Group, enable the Unify All Settings check box.

SBI Settings

1.   In GigaVUE-FM, navigate to Inventory > CONTAINER > Gigamon Container Broker Settings > Settings, the Settings page appears. From the Settings page, on the General section, you can view details of the Monitoring Domain that are configured in GCB.
2. Click a GCB UUID, and the wizard provides a split view of the following details:
o   General Settings
o   SBI
o   Diameter Settings
o   Thresholds
3. Click on the SBI, and click Edit to edit/view the following Individual and Group settings.

Individual Settings

Group Settings
● SBI transaction Logging
● Write SBI Transaction Log to a file
● Write SBI Transaction Log to stdout
● SBI Transaction Log Format
● SBI Transaction Log File Size

 
● Enable/Disable packet reordering functionality.
● Use Sequence number for packet reordering.
● Use timestamp for packet reordering.
● Packet reordering timeout in milliseconds.
● Maximum number of requests stored in queue.
● Packet reordering drop policy.
● SBI Service Translation enable/disable.
4. Click Save to changes made on the SBI Settings.

Diameter Settings

1.   In GigaVUE-FM, navigate to Inventory > CONTAINER > Gigamon Container Broker Settings > Settings, the Settings page appears. From the Settings page, on the General section, you can view the details of the monitoring domain that are configured in GCB.
2. Click a GCB UUID, and the wizard provides a split view of the following details: General Settings
o   SBI
o   Diameter Settings
o   Thresholds
3. Click on the Diameter and click Edit to edit/view the following Individual and Group settings.

Individual Settings

Group Settings
● Diameter transaction Logging
● Write Diameter Transaction Log to a file
● Write Diameter Transaction Log to stdout
● Diameter Transaction Log Format
● Diameter Transaction Log File Size

 
● Enable/Disable packet reordering functionality.
● Use timestamp for packet reordering.
● Packet reordering timeout in milliseconds.
● Maximum number of requests stored in queue.
● Packet reordering drop policy.
● SBI Service Translation enable/disable.
4. Click Save to changes made on the Diameter Settings.