SMT-HC1-S Gen 3 GigaSMART module

GigaVUE-HC1 now supports an additional module called the Generation 3 GigaSMART card (SMT-HC1-S) delivers up to 80Gb of performance throughput. There are no front end ports on this module.

      

Generation 3 GigaSMART Card (SMT-HC1-S)

Maximum Modules Per Chassis

The maximum SMT-HC1-S number of modules per chassis is two. 

Power LED (PWR)

The LED indicates the operational status of the module as follows :

● OFF means the module is not powered up.
● GREEN means the module is powered on.

Ready LED (RDY)

The LED indicates the operational status of the module as follows :

● OFF means the module is inserted but not yet configured.
● RED means the module is failed.
● GREEN means the module is ready.

H/S LED

The LED indicates the operational status of the module as follows :

● OFF means the module is in normal operation.
● BLUE means the module is ready to be removed when, the card is shut-down or not configured. LED turns on at insertion of module.

Hot Swap Button

Not supported in this module at this time.