GigaVUE HC Series and TA Series Overview

The GigaVUE HC Series delivers performance and intelligence in each of its Deep Observability Pipeline nodes, with port density and speeds that scale to your needs, from 1Gb to 100Gb. With an intuitive Web-based interface (GigaVUE‑FM) and a powerful GigaVUE‑OS, the Deep Observability Pipeline is able to replicate, filter, and selectively forward network traffic to monitoring, management, and security tools.

The GigaVUE HC Series and TA Series include the following models that run GigaVUE‑OS:

■

GigaVUE‑HC1

■

GigaVUE‑HC2

■

GigaVUE‑HC3

■

GigaVUE‑HC1-Plus

■

GigaVUE-HCT

■

GigaVUE‑TA25

■

GigaVUE‑TA25E

■

GigaVUE-TA100

■

GigaVUE‑TA200

■

GigaVUE‑TA200E

■

GigaVUE‑TA400

Note:  This document describes how to configure and operate the GigaVUE‑OS for GigaVUE HC Series and TA Series nodes.

GigaVUE‑HC1	● 1RU Footprint ● Two Module Slots (Bays) ● Dedicated Cluster Management Port ● Supports all GigaVUE‑HC1 Modules ● Cluster with HC Series and TA Series Nodes ● All ports, excluding BPS ports, of same type and speed can be used to create GigaStream.
GigaVUE‑HC2	● 2RU Footprint ● Four Module Slots (Bays) ● Internal Control Card ● Dedicated Cluster Management Port ● Supports all GigaVUE‑HC2 Modules ● All ports, excluding BPS ports, of same type and speed can be used to create GigaStream ● Cluster with HC Series and TA Series Nodes.
GigaVUE‑HC3	● 3RU Footprint ● Four Module Slots (Bays) ● Internal Control Card ● Extension Board ● Dedicated Cluster Management Port ● Supports all GigaVUE‑HC3 Modules ● Cluster with HC Series and TA Series Nodes. ● All ports, excluding BPS ports, of same type and speed can be used to create GigaStream.
GigaVUE‑HC1-Plus	● 1RU Footprint ● Two Module Slots (Bays) and one Fixed Base Module ● 4 x 100Gb / 40Gb, 8 x 25Gb, 10Gb, 1Gb connectivity ● Supports GigaSMART applications with a fixed rear GigaSMART Module. ● Supports Flex Inline in unprotected ports with 10Gb/40Gb/25Gb/100Gb/4 x 10Gb/4x25Gb speed Nodes. ● Cluster with HC Series and TA Series Nodes ● All ports, excluding BPS ports, of same type and speed can be used to create GigaStream.
GigaVUE-HCT	● 1RU and half rack width system ● One Module Slot (Bay) and one Fixed Base Module ● 2 x 100Gb/40G bconnectivity ● Supports Flex Inline in unprotected ports with 40Gb/100Gb/4x10G/4x25G speed Nodes. ● Cluster with HC Series and TA Series Nodes ● All ports, excluding BPS ports, of the same type and speed can be used to create GigaStream.
GigaVUE‑TA25	● 1 RU Footprint ● 1Gb/10Gb/48 x 25Gb/ ports and 8 x 100Gb/40Gb ports,   dual hot-pluggable power supplies (AC/DC), four rear hot swappable fan modules, two console ports, and a 10Mb/100Mb/1Gb management port ● Optional patch or breakout panel support ● Cluster with HC Series and TA Series Nodes
GigaVUE‑TA25E	● 1 RU Footprint ● 48 x 25Gb/10Gb/1Gb ports and 8 x 100Gb/40Gb port, dual hot-pluggable power supplies (AC/DC), four rear hot swappable fan modules, two console ports, and a 10Mb/100Mb/1Gb management port ● Optional patch or breakout panel support ● Cluster with HC Series and TA Series Nodes.
GigaVUE-TA100	● 1RU Footprint ● 32 x 100Gb/40Gb ports, hot swappable fan modules ● Optional patch or breakout panel support ● Cluster with HC Series and TA Series Nodes.
GigaVUE‑TA200	● 2RU Footprint ● 64 x 100Gb/40Gb ports, hot swappable fan modules ● Optional patch or breakout panel support ● Cluster with HC Series and TA Series Nodes.
GigaVUE‑TA200E	● 2RU Footprint ● 64 x QSFP28 ports (40G/100G), dual power supply modules (AC/DC) and hot swappable fan modules ● UART RS232 Console port (RJ45) and Management port (RJ45).
GigaVUE‑TA400	● 1RU Footprint ● 32 x 400Gb /100Gb/ 40Gb QSFP-DD/ QSFP28/QSFP+ ports,   dual hot-pluggable power supplies (AC/DC), seven rear hot swappable fan modules, console port and a 10M/100M/1G management port. ● Cluster with HC Series and TA Series Nodes.

Notes on TA Series Nodes

■

On the GigaVUE-TA100, only the first 16 out of 32 100Gb ports are enabled. Two port licenses are available to enable an additional 8 or 16 ports to expand from 16 ports to 24 ports or from 16 ports to 24 ports and then to 32 ports.

■

The ports on the GigaVUE-TA100 can be used as network, tool, or hybrid ports.

■

For more information about the TA Series nodes, refer to the GigaVUE TA Series Hardware Installation Guide.

For adding a physical node to GigaVUE‑FM, refer to Configure Physical Nodes.