Device and Configuration Management
During the initial start up of GigaVUE‑FM, it performs a discovery on GigaVUE H Series and TA Series nodes listed in the table below. It supports the versions listed in the following table. GigaVUE‑FM allows you to perform configuration tasks on these devices.
Table 1: GigaVUE‑FM Managed GigaVUE Nodes and Software Versions
GigaVUE Series
|
Node
|
Supported Releases for GigaVUE‑FM Management
|
GigaVUE H Series Nodes
|
|
v5.4.xx, 5.5.xx, 5.6.xx, v5.7.xx, v5.8.xx, v5.9.xx, v5.10.xx, v5.11.xx, v5.12.xx, v5.13.xx, v5.14.xx, v5.15.xx, v5.16.xx, v6.0.xx, v6.1.xx, v6.2.xx, v6.3.xx, v6.4.xx, v6.5.xx, v6.6.xx
|
GigaVUE‑HC3CCv1
|
v5.4.xx, 5.5.xx, 5.6.xx, v5.7.xx, v5.8.xx, v5.9.xx, v5.10.xx, v5.11.xx, v5.12.xx, v5.13.xx, v5.14.xx, v5.15.xx, v5.16.xx
|
GigaVUE‑HC2CCv1
|
v5.4.xx, 5.5.xx, 5.6.xx, v5.7.xx, v5.8.xx, v5.9.xx, v5.10.xx, v5.11.xx, v5.12.xx, v5.13.xx, v5.14.xx, v5.15.xx, v5.16.xx, v6.0.xx, v6.1.xx, v6.2.xx, v6.3.xx, v6.4.xx, v6.5.xx |
GigaVUE-HC1-Plus
|
v6.0.xx, v6.1.xx, v6.2.xx v6.3.xx, v6.4.xx, v6.5.xx, v6.6..xx |
GigaVUE-HCT
|
v6.5.xx, v6.6.xx |
GigaVUE TA Series Nodes
|
GigaVUE‑TA25
|
v5.10.xx, v5.11.xx, v5.12.xx, v5.13.xx, v5.14.xx, v5.15.xx, v5.16.xx, v6.0.xx, v6.1.xx, v6.2.xx, v6.3.xx, v6.4.xx, v6.5.xx,v6.6xx
|
GigaVUE-TA10
|
v6.0.xx, v6.1.xx |
GigaVUE‑TA25E
|
v6.0.xx, v6.1.xx, v6.2.xx, v6.3.xx, v6.4.xx, v6.5.xx,v6.6.xx
|
GigaVUE-TA40
|
v6.0.xx, v6.1.xx |
|
v5.4.xx, 5.5.xx, 5.6.xx, v5.7.xx, v5.8.xx, v5.9.xx, v5.10.xx, v5.11.xx, v5.12.xx, v5.13.xx, v5.14.xx, v5.15.xx, v5.16.xx, v6.0.xx, v6.1.xx, v6.2.xx, v6.3.xx, v6.4.xx, v6.5.xx,v6.6xx
|
GigaVUE‑TA200E
|
v6.0.xx, v6.1.xx, v6.2.xx, v6.3.xx, v6.4.xx, v6.5.xx
|
GigaVUE-TA400
|
v5.16.xx, v6.0.xx, v6.1.xx, v6.2.xx, v6.3.xx, v6.4.xx, v6.5.xx,v6.6xx
|
Note: Although GigaVUE‑FM may recognize earlier versions of GigaVUE-TA1 and H Series nodes, the versions listed in the above table are the officially supported versions. Earlier versions are not managed by GigaVUE‑FM.
|
|