About the GigaVUE HC Series and TA Series

The GigaVUE HC Series delivers performance and intelligence in each of its Traffic Deep Observability Pipeline nodes, with port density and speeds that scale to your needs, from 1Gb to 100Gb. With an intuitive web-based interface ( GigaVUE-FM) and a powerful GigaVUE‑OS, the Gigamon Deep Observability Pipeline is able to replicate, filter, and selectively forward network traffic to monitoring, management, and security tools.

The GigaVUE HC Series and TA Series include the following models that run GigaVUE‑OS:

■   GigaVUE‑HC1
■   GigaVUE-HC1-Plus
■   GigaVUE-HCT
■   GigaVUE‑HC2
■   GigaVUE‑HC3
■   GigaVUE‑TA25
■   GigaVUE-TA100
■   GigaVUE-TA200
■   GigaVUE‑TA400
■   Certified Traffic Aggregation White Box

Note:  This document describes how to configure and operate the GigaVUE‑OS for GigaVUE HC Series and TA Series nodes.

GigaVUE‑HC1

■   1RU Footprint
■   Built-in GigaSMART functionality
■   Standard GigaVUE‑OS CLI and GigaVUE‑FM GUI
■   Cluster with GigaVUE HC Series and GigaVUE TA Series Nodes

 

GigaVUE‑HC2

■   2RU Footprint
■   Four front-facing bays for port, TAP, BPS, and GigaSMART front modules
■   One rear bay for a GigaSMART rear module
■   Standard GigaVUE-OS CLI and GigaVUE-FM GUI
■   Cluster with GigaVUE HC Series and GigaVUE TA Series Nodes

 

GigaVUE‑HC3

■   3RU Footprint
■   Four Module Slots (Bays)
■   Internal Control Card
■   Extension Board
■   Dedicated Cluster Management Port
■   Standard GigaVUE‑OS CLI and GigaVUE-FM GUI
■   Supports all GigaVUE‑HC3 Modules
■   Cluster with GigaVUE HC Series and GigaVUE TA Series Nodes

GigaVUE‑HC1-Plus

■   1RU Footprint
■   Two Module Slots (Bays)and one Fixed Base Module
■   4x100G/40G, 8x25G,10G,1G connectivity
■   Supports GigaSMART applications with a fixed rear GigaSMART Module.
■   Supports Flex Inline in unprotected ports with 100G/40G/10G/25G/4x10G/4x25G speed Nodes.
■   Cluster with GigaVUE HC Series and GigaVUE TA Series.
■   All ports, excluding BPS ports, of same type and speed can be used to create GigaStream.

GigaVUE-HCT

■   1RU and half rack width system
■   One Module Slot (Bay) and one Fixed Base Module
■   2x100G/40G connectivity
■   Supports Flex Inline in unprotected ports with 100G/40G/4x10G/4x25G speed Nodes.
■   Cluster with GigaVUE HC Series and GigaVUE TA Series.
■   All ports, excluding BPS ports, of the same type and speed can be used to create GigaStream.

GigaVUE-TA25

■   1 RU Footprint
■   48 25Gb/10Gb/1Gb ports and 8 100Gb/40Gb ports
■   Standard GigaVUE-OS CLI and GigaVUE-FM GUI
■   Cluster with GigaVUE HC Series and GigaVUE TA Series Nodes

GigaVUE-TA100

■   1RU Footprint
■   32 x 100Gb/40Gb Ports
■   Standard GigaVUE‑OS CLI and GigaVUE-FM GUI
■   Cluster with GigaVUE HC Series and GigaVUE TA Series Nodes

 

GigaVUE-TA200

■   2RU Footprint
■   64x 100Gb/40Gb Ports
■   Standard GigaVUE‑OS CLI and GigaVUE-FM GUI
■   Cluster with GigaVUE HC Series and GigaVUE TA Series Nodes

 

GigaVUE‑TA400

■   1RU Footprint
■   32 400Gb/ 100Gb/40Gb QSFP-DD/ QSFP28/QSFP+ ports
■   Standard GigaVUE‑OS CLI and GigaVUE-FM GUI
■   Cluster with GigaVUE HC Series and GigaVUE TA Series Nodes

Notes on TA Series Nodes

  • On the GigaVUE-TA100, only the first 16 out of 32 100Gb ports are enabled. Two port licenses are available to enable an additional 8 or 16 ports to expand from 16 ports to 24 ports or from 16 ports to 24 ports and then to 32 ports.
  • On the GigaVUE-TA200, only the first 32 out of 64 100Gb ports are enabled. A port license is available to enable an additional 32 ports.
  • The ports on the GigaVUE-TA100 can be used as network, tool, or hybrid ports.
  • For more information about the TA Series nodes, refer to the GigaVUE TA Series Hardware Installation Guide.