Port Pairs

A port-pair is a bidirectional connection in which traffic arriving on one port in the pair is transmitted out the other (and vice-versa) as a passthrough TAP. Keep in mind the following rules and notes for port-pairs:

■   You can configure whether a port-pair uses link status propagation. Link port propagation does the following:
o   Enabled—when one port in the pair goes down, the other port goes down.
o   Disabled—when one port in the pair goes down, the other port is unaffected.
■   Port-pairs can be established between ports using different speeds. For example, from a 100Mb port to a 1Gb port. However, the system will warn you when creating such port-pairs. Depending on traffic volume, port-pairs between ports using different speeds can cause packet loss when going from a faster port to a slower port. For example, going from 1Gb to 100Mb, from 10Gb to 1Gb, and so on.

Create Port Pair

To configure a port pair, do the following:

1.   Select Ports > Port Pairs.
2. Click New.
3. On the Port Pair page, do the following:
a. (Optional) Type an alias in the Alias field to help identify this port pair.
b. (Optional) Type a description in the Description field.
c. Click in the First Port field and select a network port.
d. Click in the Second Port field and select another network port.
e. (Optional) Enable Link Failure Propagation.

Port pairs can operate with or without line failure propagation (LFP) as follows:

With LFP enabled, link failure on one of the ports in the port pair automatically brings down the opposite side of the port pair.
With LFP disabled, the opposite port is not brought down automatically.

Note: A port pair created on a copper TAP has LFP enabled by default.

4. Click Apply.

Use the following buttons to manage the Port Pairs.

Button

Description

Tags

Use to associate tags to Port Pairs and to remove the tags from Port Pairs when not required.

To add tags:

1. Select the required Port Pairs to which the tags must be applied.
2. Click the Tags drop-down menu button and select Add.
3. In the Add Tags to Resources page, select the required Tag Keys and Tag Values.
4. Click Ok to save the configuration.

The Port Pair is associated with the selected tags.

To remove tags:

1. Select the required Port Pairs that are already associated with tags.
2. Click the Tags drop-down menu button and select Delete.
3. In the Delete Tags from Resources page, select the required Tag Keys and Tag Values that must be removed from Port Pairs.
4. Click Ok to save the configuration.

New

Use to create a new Port Pair. Refer to Create Port Pair for detailed information.

Actions

Use the Actions drop-down button to perform the following options:

Edit: Use to edit the selected Port Pair.
Delete: Use to delete the selected Port Pair.

Export

Use to export the Port Pairs in CSV or XLSX format. The following options are available:

Export All: All Port Pairs in the list view are exported.
Export Selected: Only the selected Port Pairs are exported.