Command-Line Modes

The GigaVUE‑OS can operate in one of three modes, each with its own set of available commands – Standard, Enable, and Configure. When you first launch the CLI, you start in Standard mode with access to a limited amount of commands used to review node status. As you move from Standard mode to Enable mode to Configure mode, both the power and the number of commands available increase, as summarized in 1 GigaVUE‑OS Command-Line Modes.

Differences in Commands for admin and default Level Users

The commands available in the GigaVUE‑OS are also different depending on whether you are logged in as admin or default level user. Commands listed in bold in 1 GigaVUE‑OS Command-Line Modes are only available to admin level users.

1

GigaVUE‑OS Command-Line Modes

Note:  If you are working simultaneously with multiple GigaVUE nodes, you may want to assign each a separate hostname so its easy to identify separate terminal sessions from the system prompt. Admin users can do this in Configure mode with the hostname <name> command; refer to Configuring the GigaVUE H Series Host Name.