SMT-HC1-S (Gen 3 GigaSMART Card)

GigaVUE‑HC1-Plus now supports an additional module called the Generation 3 GigaSMART card (SMT-HC1-S), which gives 80Gb throughput .  There are no front end ports on this module. 

      

Generation 3 GigaSMART Card (SMT-HC1-S)

Maximum Modules Per Chassis

The maximum SMT-HC1-S number of modules per chassis is two. 

Power LED (PWR)

The LED indicates the operational status of the module as follows :

● OFF means the module is not powered up.
● GREEN means the module is powered on.

Ready LED (RDY)

The LED indicates the operational status of the module as follows :

● OFF means the module is inserted but not yet configured.
● RED means the module is failed.
● GREEN means the module is ready.

H/S LED

The LED indicates the operational status of the module as follows :

● OFF means the module is in normal operation.
● BLUE means the module is ready to be removed when, the card is shut-down or not configured. LED turns on at insertion of module.

Hot Swap Button

Not supported in this module at this time.