GigaVUE HC Series and TA Series Overview

The GigaVUE‑FM HC Series and TA Series delivers performance and intelligence in each of its Traffic Visibility Fabric nodes, with port density and speeds that scale to your needs, from 1Gb to 100Gb. With an intuitive web-based interface GigaVUE‑FM and a powerful CLI based GigaVUE‑OS, the Visibility Fabric is able to replicate, filter, and selectively forward network traffic to monitoring, management, and security tools. The GigaVUE‑FM provides a web-based centralized interface to configure and manage all of your GigaVUE nodes through a single pane of glass.

The GigaVUE HC Series and TA Series nodes include the following models that run GigaVUE‑OS:

■

GigaVUE‑HC1

■

GigaVUE-HC1-Plus

■

GigaVUE‑HC2

■

GigaVUE‑HC3

■

GigaVUE‑TA25

■

GigaVUE‑TA25E

■

GigaVUE-TA100

■

GigaVUE-TA200

■

GigaVUE‑TA200E

■

GigaVUE‑TA400

Table 1: GigaVUE HC Series and GigaVUE TA Series Nodes provides overviews of the GigaVUE H_Series and TA_Series nodes.

Table 1: GigaVUE HC Series and GigaVUE TA Series Nodes

GigaVUE‑HC1	■   1RU Footprint ■   Built-in GigaSMART functionality ■   Standard GigaVUE-OS CLI and GigaVUE‑FM GUI ■   Cluster with GigaVUE H Series and GigaVUE TA Series Nodes
GigaVUE‑HC2	■   2RU Footprint ■   Four front-facing bays for port, TAP, BPS, and GigaSMART front modules ■   One rear bay for a GigaSMART rear module ■   Standard GigaVUE-OS CLI and GigaVUE‑FM GUI ■   Cluster with GigaVUE H Series and GigaVUE TA Series Nodes
GigaVUE‑HC3	■   3RU Footprint ■   Four Module Slots (Bays) ■   Internal Control Card ■   Extension Board ■   Dedicated Cluster Management Port ■   Standard GigaVUE-OS CLI and GigaVUE‑FM GUI ■   Supports all GigaVUE‑HC3 Modules ■   Cluster with GigaVUE H Series and GigaVUE TA Series Nodes
GigaVUE‑HC1-Plus	■   1RU Footprint ■   Two Module Slots (Bays)and one Fixed Base Module ■   4x100G/40G, 8x25G,10G,1G connectivity ■   Supports GigaSMART applications with a fixed rear GigaSMART Module. ■   Supports Flex Inline in unprotected ports with 100G/40G/10G/25G/4x10G/4x25G speed Nodes. ■   Cluster with GigaVUE HC Series and GigaVUE TA Series. ■   All ports, excluding BPS ports, of same type and speed can be used to create GigaStream.
GigaVUE-TA25	■   1 RU Footprint ■    48 25Gb/10Gb/1Gb ports and 8 100Gb/40Gb ports. ■   Cluster with H Series nodes. ■   Standard GigaVUE-OS CLI and GigaVUE‑FM GUI. ■   Cluster with GigaVUE H Series and GigaVUE TA Series Nodes
GigaVUE‑TA25E	■   1 RU Footprint ■   48 25Gb/10Gb/1Gb ports and 8 100Gb/40Gb port, dual power supply modules(AC/DC) and four fan modules. ■   Optional patch or breakout panel support ■   Cluster with H Series nodes
GigaVUE-TA100	■   1RU Footprint ■   32 x 100Gb/40Gb Ports ■   Standard GigaVUE-OS CLI and GigaVUE‑FM GUI ■   Cluster with GigaVUE H Series and GigaVUE TA Series Nodes
GigaVUE-TA200	■   2RU Footprint ■   64 100Gb/40Gb ports ■   Optional patch or breakout panel support ■   Cluster with H Series nodes
GigaVUE‑TA200E	■   2RU Footprint ■   64 QSFP28 ports (40G/100G) ■   UART RS232 Console port (RJ45) and Management port (RJ45).
GigaVUE‑TA400	■   1RU Footprint ■   32 400Gb /100Gb/ 40Gb QSFP-DD/ QSFP28/QSFP+ ports,   dual hot-pluggable power supplies (AC/DC), seven rear hot swappable fan modules, console port and a 10M/100M/1G management port.

Notes on TA Series Nodes

■

On the GigaVUE-TA100, only the first 16 out of 32 100Gb ports are enabled. Two port licenses are available to enable an additional 8 or 16 ports to expand from 16 ports to 24 ports or from 16 ports to 24 ports and then to 32 ports.

■

The ports on the GigaVUE-TA100 can be used as network, tool, or hybrid ports.

■

For more information about the TA Series nodes, refer to the GigaVUE TA Series Hardware Installation Guide.

For adding a physical node to GigaVUE‑FM, refer to Configure Physical Nodes.