Prerequisites

To enable the flow of traffic between the components and the monitoring tools, you must create the following requirements:

■   Resource Group
■   Virtual Network
■   Subnets for VNet
■   Network Interfaces (NICs) for VMs
■   Network Security Groups
■   Virtual Network Peering
■   Access control (IAM)
■   Default Login Credentials
■   Recommended Instance Types

Resource Group

The resource group is a container that holds all the resources for a solution.

To create a resource group in Azure, refer to Create a resource group topic in the Azure Documentation.

Virtual Network

Azure Virtual Network (VNet) is the fundamental building block for your private network in Azure. VNet enables many types of Azure resources, such as Azure Virtual Machines (VM), to securely communicate with each other, the internet, and on-premises networks.

For V Series 2 configuration, you can only configure the GigaVUE fabric components in a Centralized VNet only. In case of a shared VNet, you must select a VNet as your Centralized VNet for GigaVUE fabric configuration.

To create a virtual network in Azure, refer to Create a virtual network topic in the Azure Documentation.

Subnets for VNet

The following table lists the two recommended subnets that your VNet must have to configure the GigaVUE Cloud components in Azure.

You can add subnets when creating a VNet or add subnets on an existing VNet. Refer to Add a subnet topic in the Azure Documentation for detailed information.

Subnet

Description

Management Subnet

Subnet that the GigaVUE-FM uses to communicate with the GigaVUE V Series Nodes and Proxy.

Data Subnet

A data subnet can accept incoming mirrored traffic from agents to the GigaVUE V Series Nodes or be used to egress traffic to a tool from the GigaVUE V Series Nodes. There can be multiple data subnets.

■   Ingress is VXLAN from agents
■   Egress is either VXLAN tunnel to tools or to GigaVUE HC Series tunnel port, or raw packets through a NAT when using NetFlow.

Note:  If you are using a single subnet, then the Management subnet will also be used as a Data Subnet.

Tool Subnet

A tool subnet can accept egress traffic to a tool from the GigaVUE V Series Nodes. There can be only one tool subnet.

■   Egress is either VXLAN tunnel to tools or to GigaVUE HC Series tunnel port, or raw packets through a NAT when using NetFlow.

Network Interfaces (NICs) for VMs

When using G-vTAP Agent as the traffic acquisition method, for the G-vTAP Agents to mirror the traffic from the VMs, you must configure one or more Network Interfaces (NICs) on the VMs.

■   Single NIC—If there is only one interface configured on the VM with the G-vTAP Agent, the G-vTAP Agent sends the mirrored traffic out using the same interface.
■   Multiple NICs—If there are two or more interfaces configured on the VM with the G-vTAP Agent, the G-vTAP Agent monitors any number of interfaces but has an option to send the mirrored traffic out using any one of the interfaces or using a separate, non-monitored interface.

Network Security Groups

A network security group defines the virtual firewall rules for your VM to control inbound and outbound traffic. When you launch GigaVUE-FM, GigaVUE V Series Proxy, GigaVUE V Series Nodes, and G-vTAP Controllers in your VNet, you add rules that control the inbound traffic to VMs, and a separate set of rules that control the outbound traffic.

To create a network security group and add in Azure, refer to Create a network security group topic in the Azure Documentation.

It is recommended to create a separate security group for each component using the rules and port numbers.

In your Azure portal, select a network security group from the list. In the Settings section select the Inbound and Outbound security rules to the following rules.

Network Security Groups for V Series 2 Node

Following are the Network Firewall Requirements for V Series 2 configuration.

Direction

Type

Protocol

Port

Source/Destination

Purpose

GigaVUE‑FM

Inbound

HTTPS
SSH

TCP

443
22

Administrator Subnet

Management connection to GigaVUE‑FM

Inbound

Custom TCP Rule

TCP

5671

V Series 2 Node IP

Allows GigaVUE V Series 2 Nodes to send traffic health updates to GigaVUE‑FM

Allows Next Generation G-vTAP Agents to send statistics to GigaVUE-FM.

Outbound

Custom TCP Rule
ICMP (optional)

TCP(6)

9900

GigaVUE‑FM IP

Allows G-vTAP Controller to communicate with GigaVUE‑FM

Outbound (optional)

Custom TCP Rule

TCP

8890

V Series Proxy IP

Allows GigaVUE‑FM to communicate with GigaVUE V Series Proxy

Outbound

(configuration without V Series Proxy)

Custom TCP Rule

TCP

8889

V Series 2 Node IP

Allows GigaVUE‑FM to communicate with GigaVUE V Series Node

G-vTAP Controller

Inbound

Custom TCP Rule

TCP(6)

9900

GigaVUE‑FM IP

Allows G-vTAP Controller to communicate with GigaVUE‑FM

Outbound

Custom TCP Rule

TCP(6)

9901

G-vTAP Controller IP

Allows G-vTAP Controller to communicate with G-vTAP Agents

Outbound

Custom TCP Rule

TCP

5671

GigaVUE-FM IP

Allows G-vTAP Controller to send traffic health updates to GigaVUE-FM.

G-vTAP Agent

Inbound

Custom TCP Rule

TCP(6)

9901

G-vTAP Controller IP

Allows G-vTAP Agents to communicate with G-vTAP Controller

Outbound

UDP

UDP (VXLAN)

VXLAN (default 4789)

G-vTAP Agent or Subnet IP

Allows G-vTAP Agents to VXLAN tunnel traffic to GigaVUE V Series Nodes

GigaVUE V Series Proxy (optional)

Inbound

Custom TCP Rule

TCP

8890

GigaVUE‑FM IP

Allows GigaVUE‑FM  to communicate with GigaVUE V Series Proxy

Outbound

Custom TCP Rule

TCP

8889

V Series 2 node IP

Allows GigaVUE V Series Proxy to communicate with GigaVUE V Series Node

GigaVUE V Series 2 Node

Inbound

Custom TCP Rule

TCP

8889

GigaVUE-FM IP
V Series Proxy IP

Allows V Series Proxy or GigaVUE-FM to communicate with GigaVUE V Series Node

Inbound

UDP

UDP (VXLAN)

VXLAN (default 4789)

G-vTAP Agent or Subnet IP

Allows G-vTAP Agents to (VXLAN) tunnel traffic to GigaVUE V Series Nodes

Outbound

Custom UDP Rule

UDP (VXLAN)

VXLAN (default 4789)

Tool IP

Allows GigaVUE V Series Node to communicate and tunnel traffic to the Tool

Outbound

Custom TCP Rule

TCP

5671

GigaVUE-FM IP

Allows GigaVUE V Series Node to send traffic health updates to GigaVUE‑FM

Outbound (optional)

ICMP

ICMP

echo request
echo reply

Tool IP

Allows GigaVUE V Series to health check tunnel destination traffic

Virtual Network Peering

Virtual network peering enables you to seamlessly connect two or more Virtual Networks in Azure. Virtual Network Peering is only applicable when multiple Virtual Networks are used in a design. Refer to Virtual Network Peering topic in Azure documentation for more details.

Access control (IAM)

You must have full resource access to the control the GigaVUE cloud components. Refer to Check access for a user topic in the Azure documentation for more details.

To add a role assignment, refer to Steps to assign an Azure role.

Default Login Credentials

You can login to the GigaVUE V Series Node, GigaVUE V Series Proxy, and G-vTAP Controller by using the default credentials.

Product

Login credentials

GigaVUE V Series Node

You can login to the GigaVUE V Series Node by using ssh. The default username and password is not configured.

GigaVUE V Series proxy

You can login to the GigaVUE V Series Node by using ssh. The default username and password is not configured.

G-vTAP Controller

You can login to the GigaVUE V Series Node by using ssh. The default username and password is not configured.

Recommended Instance Types

Note:  Additional instance types are also supported. Refer to Support,  Sales, or Professional Services for deployment optimization.

Product

Instance Type vCPU RAM

GigaVUE V Series Node

Standard_D4s_v4

4 vCPU

16 GB

Standard_D8S_V4

8 vCPU

32 GB

GigaVUE V Series Proxy

Standard_B1s

1 vCPU

1 GB

G-vTAP Controller

Standard_B1s

1 vCPU

1 GB