Configure GigaStream Imbalance Threshold in Devices
To configure GigaStream Imbalance threshold through the device settings page:
- On the left navigation pane, click
and under Physical, select the required device or cluster. - Click Settings > GigaStream Imbalance. The GigaStream page is displayed.
- Select or enter the following values:
- Click Save and Apply to save and apply the configuration.
| Field | Description |
|---|---|
| GigaStream |
GigaStream type for which the threshold is to be configured. Configuration for All GigaStreams will be applied to all the GigaStreams (this is equivalent to the global level in device CLI). Use the +/- buttons to configure for the various GigaStream types. |
| Variance Threshold | Variance threshold value in %. If the threshold is above or below the Variance threshold and if the traffic distribution is not uniform across the ports in the GigaStream, traps will be sent from the devices to GigaVUE-FM. |
Configure GigaStream Imbalance per GigaStream
To configure GigaStream Imbalance for a specific GigaStream:
| 1. | Select Ports > Port Groups > GigaStream. Select the GigaStream for which you want to configure the GigaStream Imbalance threshold. |
| 2. | Click Edit to open the port editor. |
| 3. | Under Variance Threshold, configure the GigaStream Imbalance Threshold in %.  |
| 4. | Click OK to save the configuration. |
The configuration is applied to that specific GigaStream.
Note: To configure the threshold values globally for all the devices managed by GigaVUE-FM refer to Configure GigaStream Imbalance Threshold in GigaVUE-FM.
