Connecting Serial Console and Mgmt Ports

 

To make basic GigaVUE-HCT connections (serial console and Mgmt ports):

1.

Locate the DB9-to-RJ45 serial cable provided with the GigaVUE-HCT. This cable is called a console cable.

Note:  This cable is Cisco-compatible. Refer to Appendix D, Console Port Signaling and Cabling for pinout details.

2.

Connect the RJ45 end of the console cable to the console port shown in the Front View of GigaVUE-HCT Chassis.

3.

Connect the DB9 end of the console cable to a PC’s COM port.

4.

Connect a standard Ethernet cable (Cat5e or better) to the 10/100/1000 Mgmt port on the chassis.

5.

Connect the other end of the Ethernet cable to an Ethernet network.