Access the Command-Line Interface over the Console Port

Use the console port on the left side of the base chassis to access the GigaVUE-HCT.

Follow these steps:

1.

Make the basic power and console cable connections described in Connecting Serial Console and Mgmt Ports and power on GigaVUE-HCT.

2.

Start a terminal application on the PC. Common terminal applications include TeraTerm, PuTTY, and Hyperterminal.

3.

Select the COM port connected to the console cable attached to the control module. For example, COM1.

4.

Configure the port settings for the console connection as follows:

o

Bits per second – 115,200

o

Data bits – 8

o

Parity – None

o

Stop bits – 1

o

Flow control – None

1 Setting COM Port Properties for the Console Connection shows an example of how these settings are configured in Hyperterminal.

 

1

Setting COM Port Properties for the Console Connection

5.

Start the terminal connection. You may need to press Enter a few times before you see the login: prompt.

6.

Log in to the command-line interface with the following default user account and password:

User:admin

Password:admin123A!

The configuration jump-start automatically starts and forces a password change.

The system administrator must change the password on the default admin account through the jump-start script. The default password (admin123A!) is no longer allowed. Refer to Run the Jump-Start Script for details.

A password must meet the following standards:

■

include 8-64 characters

■

include at least one numeral

■

include at least one upper-case letter

■

include at least one lower case letter

■

include at least one special character (for example, !, @, #, $, %, ^, &, or * – ASCII 0x21, 0x2F, 0x3A, 0x40, 0x5B, 0x5F, 0x7B, 0x7E)

■

Must not include the user name or parts of full-name.

At the Admin password? prompt in the jump-start script, enter a new password that meets the standards, and then confirm the password.