clear

Required Command-Line Mode = Configure

Use the clear command to clear statistics, caches, counters, or to reset information.

The clear command has the following syntax:

clear
   aaa authentication attempts <all | user <username>> [no-clear-history | no-unlock]
   apps
      asf stats <alias <alias> | all>
      inline-ssl
         caching <cert-validation | url>
         monitor stats
         session debug vport <vport alias>
         session summary
      netflow
         exporter stats [alias <alias> | all]
         monitor
            cache [alias <alias> | all]
            stats [alias <alias> | all]
      ssl service stats [alias <alias> | all]
   arp
   gsgroup
      flow-ops
         flow-sampling <alias <alias> | all>
         flow-filtering <alias <alias> | all>
         flow-sip <alias <alias> | all>
         ssl-decryption <alias <alias> | all>
      stats [alias <alias> | all]
   gsop stats
      alias <alias>
      all
      by-application <add-header | dedup | apf | asf | flow-sampling | flow-filtering | lb | masking | slicing | strip-header | trailer | tunnel-decap | ssl-decrypt>
      by-gsgroup <GS group alias>
   hb-counters <alias <alias> | all>
   ip

      destination stats all

      interface stats [alias <alias> | all]
   ipv6 neighbors

   load-balance port-group stats <alias <alias> | all>
   map stats <alias <alias> | all>
   nhb-counters <alias <alias> | all>   pcap all   port
      phy port-list <port-list>
      quadphy <port ID>
      stats <all | box-id <box ID> | port-list <port list> | slot <slot ID>>
   tunnel <l2gre | vxlan>
   tunnel-endpoint stats port-list <GigaSMART group alias>
   vport stats [alias <alias> | all]

The following table describes the arguments for the clear command:

Argument	Description
aaa authentication attempts <all | user <username>> [no-clear-history | no-unlock]	Clears authentication attempts.
apps asf stats <alias <alias> | all>	Resets ASF statistics.
apps inline-ssl caching <cert-validation | url>	Clears inline SSL persisted records and files. Also clears the GigaSMART shared memory caches.
apps inline-ssl monitor stats	Clears inline SSL monitor mode statistics.
apps inline-ssl session debug vport <vport alias>	Reserved for internal use.
apps inline-ssl session summary	Clears inline SSL session summary statistics.
apps netflow    exporter stats [alias <alias> | all]     monitor       cache [alias <alias> | all]       stats [alias <alias> | all]	Resets NetFlow exporter or monitor.
apps ssl service stats [alias <alias> | all]	Resets Passive SSL decryption information.
arp	Clears all dynamic ARP entries in the IPv4 cache.
gsgroup    flow-ops        flow-sampling <alias <alias> | all>       flow-filtering <alias <alias> | all>       flow-sip <alias <alias> | all>       ssl-decryption <alias <alias> | all>    stats [alias <alias> | all]	Resets gsgroup information.   Resets gsgroup flow sampling. Resets gsgroup flow filtering. Resets gsgroup SIP session report statistics. Resets gsgroup SSL decryption. Resets gsgroup statistics.
gsop    alias <alias>    all  by-application [add-header |        dedup | apf | asf |       flow-sampling |       flow-filtering |       lb | masking |       slicing | strip-header |        trailer | tunnel-decap |              ssl-decrypt]   by-gsgroup <GS group alias>	Resets gsop information.
hb-counters <alias <inline tool alias> | all>	Clears heartbeat counters on inline tools.
ip    destination stats all    interface stats <alias <alias> | all>	Resets IP destination statistics. Resets IP interface statistics.
ipv6 neighbors	Clears all dynamic entries in the IPv6 neighbors cache.
load-balance port-group stats <alias <port-group    name> | all>	Clears load balancing port group statistics.
map stats <alias <alias> [rule <rule ID>] | all>	Clears map counters.
nhb-counters <alias <alias> | all>	Clears negative heartbeat counters on inline tools.
pcap all	Clears all hardware and software entries for packet capture, such as control and data plane entries.
port    phy port-list <port-list>    quadphy <port ID>    stats [all | box-id     <box ID> | port-list <port list> |       slot <slot ID>]	Resets or clears ports as follows: ● phy—Resets the specified ports in the <port-list> on the PRT-H00-Q02X32 line card on GigaVUE HD Series nodes. This command resets ports without having to reload the entire line card. ● quadphy—Resets all ports in the group of four sequential ports (quad) containing the specified port on the PRT-H00-Q02X32 line card on GigaVUE HD Series nodes. The line card has eight quads of four ports each starting with x1..x4, x5..x8, to x29..x32. Note: Because the clear port quadphy command interrupts traffic on all four ports in the quad, use it only after trying to reset a port using the clear port phy command. ● stats—Clears port statistics reported in the show port-stats command for the specified ports. You can specify all ports, a <port-list>, or all ports in a specified slot. For example, the following command clears the port stats for all ports in slot 3: (config) # clear port stats slot 3 You can define the <port-list> using any combination of the following standard conventions (refer to Port Lists Definition in the GigaVUE‑OS for more information): ● port-id—<bid/sid/pid> ● port-alias—<port-alias> ● port-list—<bid/sid/pid_x..pid_y> (range) | <bid/sid/pid_x,bid/sid/pid_y,bid/sid/pid_z> (list)
tunnel <l2gre | vxlan>	Reserved for future use.
tunnel-endpoint stats port-list <GS group alias>	Resets tunnel endpoint statistics information.
vport stats [alias <alias> | all]	Resets vport stats information.