How to Create Map Rules with Inner Header Qualifiers and MPLS Header Qualifiers

To configure a Inner Header qualifier and MPLS Header qualifier in regular by-rule maps, refer to the following example:

Note:  The custom filter template must be configured with Inner Header and MPLS Header attributes before it can be used in a map rule. Refer to the Filter Templates chapter in the GigaVUE Fabric Management Guide

Regular by-rule map

Map level configuration with Inner Header qualifier

Step	Description	Command
1.	configure flexible filter-template with inner and mpls qualifiers.	(config) # filter-template alias ft1 qualifiers add inner-ipdst inner-ip6dst
2.	Attach the flexible filter-template to the GigaVUE-TA400 pseudo-slot based on the network port.	(config) # card slot 1/1PS1 filter-template ft1
3.	Configure port 1/1/d1 with the type network.	(config) # port 1/1/d1 type network
4.	Configure port 1/1/d11 with the type tool.	(config) # port 1/1/d11 type tool
5.	Configure the map with the alias of m1.	(config) # map alias m1
6.	Configure the source port for map m1.	(config map alias m1) # from 1/1/d1
7.	Configure the destination port for map m1.	(config map alias m1) # to 1/1/d11
8.	Configures rule 1 which qualifies the inner IPv6 destination header.	(config map alias m1) # rule add pass inner-ip6dst 2000:4::4d /128
9.	Exit map configuration.	(config map alias m1) # exit

Map level configuration with MPLS header qualifier

Step	Description	Command
1.	configure flexible filter-template with mpls qualifers.	(config) # filter-template alias ft2 qualifiers add mpls-label-id pos 1 mpls-label-ttl pos 1
2.	Attach the flexible filter-template to the GigaVUE-TA400 pseudo-slot based on the network port.	(config) # card slot 1/1PS2 filter-template ft2
3.	Configure port 1/1/d10 with the type network.	(config) # port 1/1/d10 type network
4.	Configure port 1/1/d11 with the type tool.	(config) # port 1/1/d11 type tool
5.	Configure the map with the alias of m2.	(config) # map alias m2
6.	Configure the source port for map m2.	(config map alias m2) # from 1/1/d10
7.	Configure the destination port for map m2.	(config map alias m2) # to 1/1/d11
8.	Configures rule 1 which qualifies the two MPLS headers.	(config map alias m2) # rule add pass mpls-label-id 102240 pos 1 mpls-label-ttl 250 pos 1
9.	Exit map configuration.	(config map alias m2) # exit

Related Topics:

■

To configure VLAN manipulation using GigaVUE-FM, refer to the Inner Header and MPLS Header Filtering section in Flow Map Syntax and Construction chapter in the GigaVUE Fabric Management Guide.