Set Locks and Lock-Shares

This section provides the procedures for setting port locks and lock-sharing. Before doing these procedures, refer to Locks and Lock Sharing. The procedures for setting lock and lock-sharing are as follows:

■   Remove a Lock from a User’s Port
■   Remove a User’s Lock-Share
■   Lock a Port for a User

Remove a Lock from a User’s Port

To remove a user’s lock from a port, administrators do the following:

  1. On the left navigation pane, go to go to Physical > Nodes.
  2. Select the required node.
  3. Select Ports in the Navigation pane, then go to Ports > All Ports.
  4. Select the port on which you want to remove a lock.
  5. Click Edit.
  6. Clear the Lock Port check box.

Remove a User’s Lock-Share

To remove a user’s lock-share, administrators do the following:

1.   On the left navigation pane, go to go to Physical > Nodes.
2. Select the required node.
3. Select Ports in the Navigation pane, then go to Ports > All Ports.
4. Select the port or ports on which you want to remove a lock-share.
5. Click Edit.
6. Click on the Lock shared with Users field and remove the user.
7. Click Save.

Lock a Port for a User

To lock a port for a user, administrators can do the following:

1.   On the left navigation pane, go to go to Physical > Nodes.
2. Select the required node.
3. Select Ports > Ports > All Ports.
4. Select the port or ports on which you want to remove a lock.
5. Click Edit.
6. Select Lock Port if it is not already selected.
7. Click on the Lock shared with Users field and add the user.