Unpacking the GigaVUE‑HC2 Shipment

The GigaVUE‑HC2 node is shipped partially assembled. The chassis and parts kit are shipped in one box – control card and modules are shipped in their own separate boxes. Use the following procedure to unpack the node:

  1. Inspect the shipping boxes. If any of the cartons were damaged, file a claim with the carrier who delivered them.
  2. Open the box containing the GigaVUE‑HC2 chassis and remove the parts kit from the top of the shipment. The parts kit contains the power cords, console cable and adapter, optional cable management assembly, and power supply covers.

If you plan on installing the optional cable management assembly, set both the assembly and its matching custom rack ear aside for installation.

  1. Open the following additional boxes and set them aside for assembly (each control card and module is shipped in separate boxes):
o   control card (one per chassis)
o   modules
  1. Leave all protective filler panels in place in the chassis. DO NOT install the control card or modules yet. Gigamon recommends rack-mounting the GigaVUE‑HC2 chassis empty because of its weight (~37lb).

1 GigaVUE‑HC2