Port Numbering

The base chassis uses standard conventions for identifying network/ tool ports, both on the modules themselves, as well as in the CLI:

100Gb/40Gb Ports	■   Numbered with a leading C. For example, the base chassis includes 100Gb/40Gb ports C1 to C4.
25Gb/10Gb/1Gb Ports	■   Numbered with a leading X. For example, the base chassis includes 25Gb/10Gb/1Gb ports X1 to X8. Note:  In one quad( a group of four ports), there cannot be a mix of 10Gb,25Gb ports or 1 Gb ports.

Note:  When referring to ports in the CLI, the format is box ID/slot ID/port ID. For example, 1/1/x6 refers to box 1, slot 1, port X6.

■

GigaVUE‑HC1-Plus: The base chassis is numbered 1. Slots (bays) are numbered 2-3 from left to right.

Note:  The port labels on the base chassis faceplate use upper-case C, and Xcharacters to identify ports. However, the CLI uses lowercase notation to refer to ports (for example, c1 and x1).