G-TAP M Series TAP Module Specifications
This chapter describes the features and benefits, module specifications, physical dimensions and electrical characteristics ofG-TAP M Series
Features and Benefits
|
Feature |
Benefit |
|
Powerful Traffic Mirroring Capabilities |
The G-TAP M Series modules passively mirror 100% of network traffic including errors, non-standard network traffic, and network packets that do not conform to established protocol standards enabling detailed analysis, security, and monitoring. |
|
Completely Passive TAP |
The G-TAP M Series modules rely on passive full duplex fiber optic splitters, which results in non-point-of-failure operation. It requires no power source to operate. |
|
GigaVUE® Integration |
Easy integration with the full family of GigaVUE® Visibility Fabric™ nodes for maximum flexibility. Connect the G-TAP M Series modules to network ports on a GigaVUE fabric node to take advantage of powerful intelligent traffic filtering, aggregation, and modification offered through Visibility Fabric architecture. |
G-TAP M Series TAP Module Specifications
There are three types of G-TAP M Series modules:
|
Type |
Products |
||||||
|
Multimode (MM) |
|
||||||
|
Single-mode (SM) |
|
||||||
|
Bi-directional (BiDi) |
|
Table 1: MM, SR TAP Modules describes the MM, SR TAP modules.
|
G-TAP M Series Module |
Speed |
Split Ratio |
Max Network Loss |
Max TAP Loss |
Connector |
Mounting Chassis |
Fiber Type |
|
TAP-M251 |
1G/10G |
50/50 |
3.9dB |
3.9dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
MM (50/125 micron) for 850nm wavelength |
|
TAP-M251T |
1G/10G |
50/50 |
3.9dB |
3.9dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M251LT |
1G/10G/25G |
50/50 |
3.9dB |
3.9dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M251ULT |
1G/10G/25G |
50/50 |
3.9dB |
5.1dB |
LC (UPC) |
TAP-M202ULT |
|
|
TAP-M261LT |
1G/10G/25G |
60/40 |
3.15dB |
5.15dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M271 |
1G/10G |
70/30 |
2.2dB |
6.2dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M271T |
1G/10G |
70/30 |
2.2dB |
6.2dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M271LT |
1G/10G/25G |
70/30 |
2.2dB |
6.2dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M271ULT |
1G/10G/25G |
70/30 |
2.2dB |
7.4dB |
LC (UPC) |
TAP-M202ULT |
|
|
TAP-M451 |
40G/100G |
50/50 |
4.3dB |
4.3dB |
MPO/MTP (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M451T |
40G/100G |
50/50 |
4.3dB |
4.3dB |
MPO/MTP (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M451ULT |
40G/100G |
50/50 |
4.3dB |
5.5dB |
MPO/MTP (UPC) |
TAP-M202ULT |
|
|
TAP-M471 |
40G/100G |
70/30 |
2.8dB |
6.4dB |
MPO/MTP (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M471-SR10 |
100G |
70/30 |
2.8dB |
6.6dB |
MPO/MTP (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M471T |
40G/100G |
70/30 |
2.8dB |
6.4dB |
MPO/MTP (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M471ULT |
40G/100G |
70/30 |
2.8dB |
7.4dB |
MPO/MTP (UPC) |
TAP-M202ULT |
|
|
TAP-M252LT |
100M/1G |
50/50 |
3.9dB |
3.9dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
MM (62.5/125 micron) for 850nm wavelength |
|
TAP-M262LT |
100M/1G |
60/40 |
3.15dB |
5.15dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M272LT |
100M/1G |
70/30 |
2.2dB |
6.2dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
Table 2: SM, LR TAP Modules describes the SM, LR TAP modules, and describes the BiDi TAP module1.
|
G-TAP M Series Module |
Speed |
Split Ratio |
Max Network Loss |
Max TAP Loss |
Connector |
Mounting Chassis |
Fiber Type |
|
TAP-M253 |
1G/10G/400G Base |
50/50 |
3.7dB |
3.7dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
SM (9/125 micron) for 1310nm or 1550nm wavelength |
|
TAP-M253T |
1G/10G/25G/40G/100G/400G Base |
50/50 |
3.7dB |
3.7dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M253LT |
1G/10G/25G/40G/100G/400G Base |
50/50 |
3.7dB |
3.7dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M253ULT |
1G/10G/25G/40G/100G/400G Base |
50/50 |
3.7dB |
4.2dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M263LT |
1G/10G/25G/40G/100G/400G Base |
60/40 |
3.05dB |
4.95dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M273 |
1G/10G/400G Base |
70/30 |
2.0dB |
6.1dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M273T |
1G/10G/25G/40G/100G/400G Base |
70/30 |
2.0dB |
6.1dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M273LT |
1G/10G/25G/40G/100G/400G Base |
70/30 |
2.0dB |
6.1dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M273ULT |
1G/10G/25G/40G/100G/400G Base |
70/30 |
2.0dB |
6.6dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M453 |
40G/100G/400G |
50/50 |
3.7B |
3.7dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M453T |
40G/100G/400G |
50/50 |
4.3dB |
4.3dB |
MPO/MTP (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M473 |
40G/100G/400G |
70/30 |
2.0dB |
6.1dB |
LC (UPC) |
TAP-M100T/TAP-M200 |
|
|
TAP-M473T |
40G/100G/400G |
70/30 |
2.8dB |
6.7dB |
MPO/MTP (UPC) |
TAP-M100T/TAP-M200 |
Note: TAP-M453 and TAP-M473 support 100Gb CWDM4, in addition to LR4.
Table 3: BiDi TAP Modules describes the BiDi TAP modules.
|
G-TAP M Series Module |
Speed |
Split Ratio |
Max Network Loss |
Max TAP Loss |
Connector |
Fiber Type |
|
TAP-M506 |
40Gb |
50/50 |
3.9dB |
3.9dB |
LC (UPC) |
MM (50.5/125 micron) for 850nm/900nm wavelength |
|
TAP-M506A |
40Gb/100Gb |
50/50 |
3.9dB |
3.9dB |
LC (UPC) |
|
|
TAP-M506T |
40Gb/100Gb |
50/50 |
3.9dB |
3.9dB |
LC (UPC) |
Table 4: MM, SR and SM, LR Breakout Panels describes the MM, SR and SM, LR breakout panels.
|
G-TAP M Series Breakout Panel |
Speed |
Network Loss |
Connector |
Fiber Type |
|
PNL-M341 |
40Gb SR4 100Gb SR4 |
≤0.70dB |
MPO-12 (UPC) |
MM (50 micron) for 850nm wavelength |
|
10Gb SR 25Gb SR |
≤0.30dB |
LC (UPC) |
MM (50 micron) for 850nm wavelength |
|
|
PNL-M341T |
40Gb SR4 100Gb SR4 |
≤0.70dB |
MPO-12 (UPC) |
MM (50 micron) for 850nm wavelength |
|
10Gb SR 25Gb SR |
≤0.30dB |
LC (UPC) |
MM (50 micron) for 850nm wavelength |
|
|
PNL-M343 |
40Gb PLR4 100Gb PLR4 |
≤0.75dB |
MPO-12 (APC) |
SMF-28e for 1270 ~ 1630nm wavelength |
|
10Gb LR 25Gb LR |
≤0.30dB |
LC (UPC) |
SMF 1310nm wavelength |
|
|
PNL-M343T |
40Gb PLR4 100Gb PLR4 |
≤0.70dB |
MPO-12 (APC) |
SMF-28e for 1310/1550nm wavelength |
|
10Gb LR 25Gb LR |
≤0.30dB |
LC (UPC) |
SMF 1310/1550nm wavelength |
|
|
TAP-M452 |
100G |
3.90dB |
MTP |
|
Physical Weight and Dimensions
Table 5: Physical Weight and Dimensions of Chassis and TAP module describes the physical weight and dimensions of Chassis and TAP module.
Electrical Characteristics
G-TAP M Series TAP Module Specifications describes the electrical characteristics of the G-TAP M Series modules.
|
Type |
Specification |
|
Power Requirements |
Not Applicable. The G-TAP M Series modules are passive. |
|
Link TAP Capacity |
Each module taps up to six duplex links (three for MPO cabling). Each link produces two outputs: one from each direction in the link. Up to six modules can be housed in the 1 RU G-TAP M Series chassis. |
|
Operating Temperature |
32°F to 140°F (0°C to 60°C) |
|
Storage Temperature |
-4°F to 158°F (-20°C to 70°C) |
|
Storage Humidity |
10% to 90%, relative, non-condensing |
|
Altitude |
Up to 15,000ft (4.6km) |
