vport
Use the vport command to configure a GigaSMART virtual port used as an aggregation point for traffic directed to second level maps. Second level maps include an Adaptive Packet Filtering component (gsrule) or a GTP rule (flow-rule).
This command does not apply to GigaVUE TA Series nodes.
The vport command has the following syntax:
vport alias <alias>
gsgroup <GigaSMART group alias>
failover-action <vport-bypass | vport-drop | network-bypass | network-drop | network-port-forced-down>
mode gtp-overlap
If a gsgroup has not been assigned to a vport yet, the vport command has the following syntax:
vport alias <alias>
gsgroup <GigaSMART group alias>
Refer to the “GigaVUE-OS CLI—Configuration Examples” chapter in this guide for examples.
The following table describes the arguments for the vport command:
Argument |
Description |
|||||||||||||||
vport alias <alias> |
Specifies the alias of the virtual port. |
|||||||||||||||
gsgroup <GigaSMART group alias> |
Specifies the GigaSMART group associated with the virtual port. For example: (config) # vport alias vport1 gsgroup gsgrp5 |
|||||||||||||||
failover-action <vport-bypass | vport-drop | network-bypass | network-drop | network-port-forced-down> |
Specifies a failover action for the virtual port for inline SSL decryption as follows:
The default is vport-bypass. For example: (config) # vport alias vport1 failover-action vport-bypass Note: To configure the failover-action, first assign a gsgroup to the vport. |
|||||||||||||||
mode gtp-overlap |
Specifies the GTP overlap mode. This is an optional mode to use with GTP forward listing and GTP flow sampling when multiple copies of a GTP packet need to be sent to more than one tool. For example: (config) # vport alias vport1 mode gtp-overlap Note: To configure the mode, first assign a gsgroup to the vport. Refer to the “GigaSMART GTP Whitelisting and GTP Flow Sampling” section in the GigaVUE Fabric Management Guide for details. |
Related Commands
The following table summarizes other commands related to the vport command:
Task |
Command |
Configures a vport on a specified GigaSMART group. |
(config) # vport alias vport1 gsgroup gsg1 |
Displays a specified vport. |
# show vport alias vport1 |
Displays all vports. |
# show vport all |
Displays statistics for a specified vport.
|
# show vport stats alias vport1 |
Displays statistics for all vports. Note: When a vport is modified in the first level map and the second level map, only the statistics of the new vport is visible. The statistics of the previous vport cannot be retrieved. |
# show vport stats all |
Deletes a specified vport. |
(config) # no vport alias vport1 |
Clears the failover action on a specified vport. |
(config) # no vport alias vport1 failover-action |
Deletes all vports. |
(config) # no vport all |