spine-link
Required Command-Line Mode = Configure
Use the spine-link command to configure spine links, which are part of the configuration of the leaf and spine architecture with multiple paths for achieving high availability in a cluster environment. Refer to the “Multi-Path Leaf and Spine” chapter in the GigaVUE Fabric Management Guide for details.
The spine-link command has the following syntax:
spine-link alias <alias>
comment <comment>
port-list <port-list>
The following table describes the arguments for the spine-link command:
Argument |
Description |
alias <alias> |
Specifies an alias for the spine link. For example: (config) # spine-link alias leaf1spine |
comment <comment> |
Adds a comment to a spine link. Comments can be up to 128 characters. Comments longer than one word must be enclosed in double quotation marks. For example: (config) # spine-link alias leaf1spine comment “Leaf 1 Spine” |
port-list <port-list> |
Specifies the list of stack GigaStream aliases in the spine link. Separate each alias with a comma. For example: (config) # spine-link alias leaf1spine port-list leaf1spine1gs,leaf1spine2gs |
Related Commands
The following table summarizes other commands related to the spine-link command:
Task |
Command |
Displays all spine links. |
# show spine-link |
Displays a specific spine link. |
# show leaf1spine |
Displays all spine links. |
# show spine-link all |
Displays all spine links in table format. |
# show spine-link brief |
Deletes a specific spine link. Note: To delete a spine link, first delete the participating stack links. |
(config) # no spine-link alias leaf1spine |
Deletes all spine links. Type YES to confirm the deletion or type NO to cancel it. |
(config) # no spine-link allEnter ‘YES’ to confirm this operation: |