map-scollector
Required Command-Line Mode = Configure
Use the map-scollector command to configure shared collector maps and parameters. Use a shared collector to send any packets that do not match the map rules to a destination.
The map-scollector command has the following syntax:
map-scollector alias <alias>
collector <port-id | port-alias | port-list | gigastream-alias | gigastream-alias-list | inline-tool-alias |
inline-tool-group-alias | inline-serial-alias | bypass>
comment <comment>
from <port-id | port-alias | port-list | inline-network-alias | inline-network-group-alias>
rewrite-dstmac <value> | rewrite-<value>
roles <assign | replace> <role> [to <role list>]
The following table describes the arguments for the map-scollector command:
Argument |
Description |
||||||||||||||||||
alias <alias> |
Specifies the name of the shared collector map. The alias must be unique and can contain up to 128 characters. Aliases are case-sensitive. For example: (config) # map-scollector alias scoll |
||||||||||||||||||
<port-id | port-alias | port-list | gigastream-alias | gigastream-alias-list | inline-tool-alias | inline-tool-group-alias | inline-serial-alias | bypass> |
Specifies the destination(s) for packets matching this shared collector map. Use one of the following:
Refer to the “Associating Inline Networks with Inline Tools Using Inline Maps” section in the GigaVUE Fabric Management Guide for details on inline-tool-alias, inline-tool-group-alias, inline-serial-alias, and bypass. For example: (config) # map-scollector alias scoll 2/1/x1 |
||||||||||||||||||
comment <comment> |
Specifies a unique text string that describes the shared collector map. Comments can be up to 128 characters. Comments longer than one word must be enclosed in double quotation marks.For example: (config) # map-scollector alias scoll comment “Shared collector” |
||||||||||||||||||
from <port-id | port-alias | port-list | inline-network-alias | inline-network-group-alias> |
Specifies the source(s) for packets matching this shared collector map. Use one of the following:
Refer to the “Associating Inline Networks with Inline Tools Using Inline Maps” in the GigaVUE Fabric Management Guide for details on inline-network-alias and inline-network-group-alias. For example: (config) # map-scollector alias scoll from inNet |
||||||||||||||||||
rewrite-dstmac <value> | rewrite-src mac <value> |
For MAC Address rewrite ,configure the destination and Source fields as follows:
|
||||||||||||||||||
roles <assign | replace> <role> [to <role list>] |
Assigns a user role to a map access list or replaces a user role for a shared collector map. For example: (config) # map-scollector alias scoll roles assign monitor to listen_roles |
Related Commands
The following table summarizes other commands related to the map-scollector command:
Task |
Command |
Displays all shared collector maps. |
# show map-scollector |
Displays information for a specified shared collector map. |
# show map-scollector alias mycoll |
Displays all shared collector maps. |
# show map-scollector all |
Displays all shared collector maps in table format. |
# show map-scollector brief |
Deletes a specified shared collector map. |
(config) # no map-scollector alias mycoll |
Deletes all destinations configured for a specified shared collector map. |
(config) # no map-scollector alias mycoll collector |
Deletes the comments for a specified shared collector map. |
(config) # no map-scollector alias mycoll comment |
Deletes all sources configured for a specified shared collector map. |
(config) # no map-scollector alias mycoll from |
Deletes an assigned role from a specified shared collector map. |
(config) # no map-scollector alias mycoll roles assign monitor |
Deletes all assigned roles from a specified shared collector map. |
(config) # no map-scollector alias mycoll roles assign all |
Deletes the configured destination and source MAC Address. |
(config)# no rewrite-dstmac | no rewrite-srcmac |