apps exporter

Use the apps exporter command to configure the exporter.

The apps exportercommand has the following syntax:

apps exporter alias <alias>
    type <gtp-cups | tunnel>

source

    interface

    ip-interface

    l4

    port

destination

l4
    port <1-65535>

    protocol <tcp | udp>

l3

    ip

    ver6

    ver4

    ttl <1-255>

    dscp <0-63>

    protocol <ipv4 | ipv6 | auto>

gsgroup <add | delete>

The following table describes the arguments for the apps exporter command:

Argument

Description

alias <alias>

Specifies the listener alias.

type <gtp-cups | tunnel>

Specifies the type of the listener as follows:

gtp-cupsGigaSMART host for GTP-Cups.
tunnelGigaSMART host for Tunnel.

source <interface <ip-interface> | l4 <port> >

Configures the following exporter source parameters:

interface — Configures the following exporter interface to be used.
■   ip interface — Configure the exporter IP interface to be used
l4 — Configures the following exporter source transportation layer parameters:
■   port— Configure the exporter source port.
destination <l3 | l4>

Configures the following exporter destination parameters:

l3 — Configures the exporter destination network layer parameters.
l4 — Configures the exporter destination transportation layer parameters.

Note:  When the listener type is gtp-cups, the configuration of exporter destination network layer parameters is optional.

l4< port <1-65535>

protocol <tcp | udp>>

Configures the following transportation layer parameters in the exporter:

port— Configures the listener source port. The value ranges from 1 to 65535.
protocol — Configures the following listener l4 protocol
o TCP
o UDP
l3 <ip <ver6 | ver4 | ttl <1-255>dscp <0-63>> <protocol <ipv4 | ipv6 | auto>>

Configures the following network layer parameters in the exporter:

dscp — Configures the DSCP value. The value ranges from 0 to 63.
protocol — Configures the following listener protocol.
■   IPv4 — Uses IPv4 for communication.
■   IPv6 — Uses IPv6 for communication.
■   Auto — Detects the protocol based on context.
ttl — Configures the Time-To-Live (TTL) in seconds. The value ranges from t to 255.
gsgroup <add | delete>

Configures the gsgroup on which the listener has to be activated or deactivated as follows:

add — Activates the listener on which the gsgroup is configured.
delete —Deactivates the listener on which the gsgroup is configured.