Displaying Ports

Use the show port command to display all ports in a table format. The output of the command is as follows:

 

(config) # show port

Use the show port params command to display port parameters. The output of the command on GigaVUE H Series nodes is as follows:

(config) # show port params port-list 11/3/x1

             Parameter          11/3/x1
 ======================  ===============
            Name Alias:                -
                  Type:          network
                 Admin:          enabled
           Link status:               up
        Auto Negotiate:              off
                Duplex:             full
          Speed (Mbps):            10000
                   MTU:             9400
         Force Link Up:              off
            Port Relay:              N/A
             Port Role:              N/A
      Ingress Vlan Tag:                -
       Egress Vlan Tag:             none
          Buffer Index:             high
             Discovery:              off
                   GDP:           enable
             Timestamp:                -
             Source-id:                -
              SFP type:          sfp+ sr
       SFP vendor name:  GIGAMON SFP-532
         SFP vendor PN:  GMON8571D3BCL-G
         SFP vendor SN:          AQP1LNY
 SFP Power (1-2) (dBm):            -2.77
 SFP Power (3-4) (dBm):         -      -
 SFP Power (5-6) (dBm):         -      -
 SFP Power (7-8) (dBm):         -      -
 SFP Power (9-10)(dBm):         -      -
   SFP Temperature (C):              N/A
 Alarm THld (H-L)(dBm):      0.00 -20.00
 Alert THld (H-L)(dBm):     -1.00 -18.01
     Power THld Status:           Normal
               Comment:                 

Note:  The output of the show port params command on GigaVUE TA Series nodes and the Certified Traffic Aggregation White Box do not have values for the power thresholds as follows:

(config) # show port params slot 8

...
 Alarm THld (H-L)(dBm):              N/A
 Alert THld (H-L)(dBm):              N/A
     Power THld Status:              N/A
               Comment:                 

Note:  The output of the show port params command on GigaVUE‑HC2, GigaVUE HD Series, GigaVUE-TA100, GigaVUE-TA100-CXP, GigaVUE‑HC3, or GigaVUE-TA200 and GigaVUE‑TA25 nodes equipped with 100Gb ports and QSFP28 transceivers, display an SFP temperature as follows:

(config) # show port params port-list 13/4/c1..c2

...
SFP type:        qsfp28 sr        qsfp28 sr
       SFP vendor name:          GIGAMON          GIGAMON
         SFP vendor PN:     FTLC9551REPM     FTLC9551REPM
         SFP vendor SN:          XU60DZN          XU60DZS
 SFP Power (1-2) (dBm):    -40.00 -40.00    -40.00 -40.00
 SFP Power (3-4) (dBm):    -40.00 -40.00    -40.00 -40.00
 SFP Power (5-6) (dBm):         -      -         -      -
 SFP Power (7-8) (dBm):         -      -         -      -
 SFP Power (9-10)(dBm):         -      -         -      -
 SFP Temperature (C):            20.94            21.12
...

Note:  The output of the show port params command on GigaVUE-TA100-CXP nodes equipped with 100Gb ports and CXP transceivers, display an SFP temperature as follows:

(config) # show port params port-list 1/1/c1

...
SFP type:           cxp sr
       SFP vendor name:          GIGAMON
         SFP vendor PN:    FTLD10CE3C-GM
         SFP vendor SN:          XWG0J50
 SFP Power (1-2) (dBm):    -40.00 -40.00
 SFP Power (3-4) (dBm):    -40.00 -40.00
 SFP Power (5-6) (dBm):    -40.00 -40.00
 SFP Power (7-8) (dBm):    -40.00 -40.00
 SFP Power (9-10)(dBm):    -40.00 -40.00
   SFP Temperature (C):            23.88