Displaying Ports Configured with Uni-Directional, Simplex Cable/Links

When forcelinkup is enabled on a 100Gb network port on PRT-HD0-C06X24, the output of the show port and show port params commands display RXon as follows:

(config) # show port

(config) # show port params port-list 1/3/c2

Parameter 1/3/c2

 ======================  ===============
            Name Alias:                -
                  Type:          network
                 Admin:          enabled
           Link status:               up
        Auto Negotiate:              off
                Duplex:             full
          Speed (Mbps):           100000
                   MTU:             9400
         Force Link Up:             RXon
            Port Relay:              N/A
             Port Role:                -
      Ingress Vlan Tag:                -
       Egress Vlan Tag:             none
          Buffer Index:             high
             Discovery:              off
                   GDP:           enable
             Timestamp:                -
             Source-id:                 
              SFP type:        qsfp28 sr
       SFP vendor name:  GIGAMON Q28-502
         SFP vendor PN:      GMON85S-NGM
         SFP vendor SN:     INHAM7470183
 SFP Power (1-2) (dBm):      -0.01 -0.20
 SFP Power (3-4) (dBm):       0.04  0.30
 SFP Power (5-6) (dBm):         -      -
 SFP Power (7-8) (dBm):         -      -
 SFP Power (9-10)(dBm):         -      -
   SFP Temperature (C):            35.69
 Alarm THld (H-L)(dBm):         -      -
 Alert THld (H-L)(dBm):         -      -
     Power THld Status:              N/A
               Comment: