Enable LLDP, CDP, and Gigamon Discovery on Ports
To enable LLDP, CDP, and Gigamon Discovery on ports:
- On the left navigation pane, click , and then select Physical > Nodes.
- Click on a node on which you want to enable LLDP and CDP. The Overview page of the node appears.
- In the left navigation pane, select Ports > All Ports.
- On the Ports page, select the Port ID on which you want to enable LLDP, CDP, and Gigamon Discovery. Click Edit.
- Under Ports Discovery, enable the checkbox for the required discovery protocols. Enable all three checkboxes to enable all protocols.
- Click OK.
- Click Save.
- Click the Ports Discovery tab. For each port on which the ports discovery is enabled, the neighbor information is displayed.
Refer to:
- Enable Gigamon Discovery on Chassis for enabling Gigamon Discovery protocol at the chassis level.
- Enable LLDP and CDP on Chassis for enabling other discovery protocols at the chassis level.
- Port Discovery for bulk configuring the discovery protocols on all the ports across the devices in GigaVUE-FM.