Copper TAPs

TAP-HC0-G100C0 module on the GigaVUE‑HC2 and the TAP-HC1-G10040 on the GigaVUE‑HC1, provide the ability to tap a copper Gigabit Ethernet link, copying traffic to specified tool ports as it flows through the TAP. There are pairs of ports for tapping in to bidirectional link. The speed is set to 1Gb. You can configure the copper bypass module to receive traffic from SPAN port or external copper TAP.

Refer to the following:

■

Passive Mode vs. Active Mode

■

Configure TAP Connections

■

Configure Inline Bypass on TAP-HC0-G100C0 and TAP-HC1-G10040