Configure Port Packet Drop/Error in GigaVUE-FM
You can configure the port packet drop/error threshold globally for all the devices managed by GigaVUE-FM. To configure the port packet drop/error in GigaVUE-FM:
| 1. | On the left navigation bar, click  . |
| 2. | Select System > Packet Errors and Drops. The Packet Errors and Drops page is displayed: |
| Field | Description |
|---|---|
| Port Type |
Port type for which the threshold is to be configured. Configuration for All Ports will be applied to all the ports (this is equivalent to the global level in device CLI). |
| Packet Drop Threshold |
Percentage and count value for packet drop threshold configuration for Rx and Tx. |
| Packet Error Threshold |
Percentage and count value for packet error threshold configuration for Rx and Tx. |
If the device configuration is different from the global level configuration or the device has port-level configuration, then those devices will be listed in the Non Defaults page. Configurations changes at the global level will not be applied to the devices in the Non Defaults page.
Use the Reset button to remove the current device-level configuration and to apply the GigaVUE-FM global configuration.
Related topics
