GigaVUE-HC3 Modules
With a variety of interchangeable modules and 3.2Tb throughput for CCv1 and 6.4Tb throughput for CCv2, GigaVUE-HC3 nodes are ready to grow with your needs. The following modules offer port speeds of 10Gb, 25Gb, 40Gb, and 100Gb:
|
PRT-HC3-X24
|
|
•
|
CCv1 - Twenty-four 10Gb (SFP+ and SFP+ Copper) Ports |
|
•
|
CCv2 - Twenty-four 10Gb/25Gb (SFP+, SFP28, and SFP+ Copper) Ports |
|
PRT-HC3-X24 Module
|
|
PRT-HC3-C08Q08
|
|
•
|
Eight 100Gb (QSFP28) Ports
or |
|
•
|
Sixteen 40Gb (QSFP+) Ports |
|
PRT-HC3-C08Q08 Module
|
|
PRT-HC3-C16
|
|
•
|
Sixteen100Gb (QSFP28) Ports |
|
PRT-HC3-C16 Module
|
|
SMT-HC3-C05
|
|
•
|
GigaSMART module with Five 100Gb (QSFP28) Ports |
|
SMT-HC3-C05 Module
|
|
BPS-HC3-C25F2G
|
|
•
|
CCv1 - Bypass Combo Module with Two 100Gb/40Gb SR4 MPO BPS Port Pairs and Sixteen 10Gb SFP+ and SFP+ Copper Port Cages |
|
•
|
CCv2 - Bypass Combo Module with Two 100Gb/40Gb/25Gb SR4 MPO BPS Port Pairs and Sixteen 10Gb/25Gb SFP+, SFP28, and SFP+ Copper Port Cages |
|
BPS-HC3-C25F2G Module
|
|
BPS-HC3-C35C2G
|
|
•
|
CCv1 - Bypass Combo Module with Two 100Gb LR BPS Port Pairs and Sixteen 10Gb SFP+ and SFP+ Copper Port Cages |
|
•
|
CCv2 - Bypass Combo Module with Two 100Gb LR BPS Port Pairs and Sixteen 10Gb/25Gb SFP+, SFP28, and SFP+ Copper Port Cages |
|
BPS-HC3-Q35C2G and BPS-HC3-C35C2G Modules
|
|
BPS-HC3-Q35C2G
|
|
•
|
CCv1 - Bypass Combo Module with Two 40Gb LR BPS Port Pairs and Sixteen 10Gb SFP+ and SFP+ Copper Port Cages |
|
•
|
CCv2 - Bypass Combo Module with Two 40Gb LR BPS Port Pairs and Sixteen 10Gb/25Gb SFP+, SFP28, and SFP+ Copper Port Cages |
|
BPS-HC3-Q35C2G and BPS-HC3-C35C2G Modules
|
Modules are hot-swappable and can be installed in any of the available front bays in a GigaVUE-HC3 node. However, refer to Module Removal and Replacement Procedure (Hot Removal) for instructions – you must follow a specific procedure when removing modules to preserve node stability.
Before installing modules in the node, the GigaVUE-HC3 node must be running software version 5.0 or higher. Before installing the PRT-HC3-C16 module, the node must be running software version 5.4 or higher and be equipped with Control Card version 2 (CCv2).
MORE INFORMATION 
