Removing the Rear GigaSMART Module

Use the following procedure to remove the rear GigaSMART module from the node with the power on.

For removal of other GigaVUE-HC2 modules, refer to Module Removal and Replacement Procedure (Hot Removal).

Important: Hot removal of the GigaSMART module without following the listed steps can cause system instability and require a reboot.

Before starting, make sure you are wearing an ESD-preventive wrist or ankle strap.

1Save map rules with the following CLI command:

config text generate active running save <name.txt>

Refer also to Backing Up Running Configuration.

1.

Press the H/S button to prepare the module for removal. Wait for the LED to turn solid blue.

2.

Slide the module out of chassis and store it in a static-safe location.

3.

Insert the new GigaSMART module.

4.

To verify the module is operationally up, issue the following CLI command:

(config) # show cards

5.

Apply GigaSMART licenses with the following CLI command:

license install box id <#> key