Introduction to Cables
This chapter provides the list of the different types of cables and their specifications. The cable connectivity differs based on the transceiver type you use. Refer to the “Transceiver and Cable Matrix” tab in the GigaVUE-OS Compatibility and Interoperability Matrix for compatibility information.
Refer to the following sections:
Cable Naming Conventions |
Cable Types and Specifications |
Cable Naming Conventions
Cable Names |
Description |
MPO |
Multi-fiber Push On |
MTP |
A high performance MPO connector |
APC |
Angled Physical Contact or Angled Polished Connector. It has an end face that is polished at an 8-degree angle. |
UPC |
Ultra Physical Contact or Ultra Polished Connector. It has an end face that is polished with no angle. |
LR |
Long range |
SR |
Short range |
LC |
Lucent Connectors |
DAC |
Direct Attach Cable |
MM |
Multimode |
SM |
Singlemode |
SMF |
Singlemode Fiber |
MMF |
Multimode Fiber |
Cable Types and Specifications
Table 1: Identify Cables lists the standards, cable types, and specifications.
Standard |
Cable Type |
Specifications |
|||||||||||||||
|
MPO/UPC (f) to MPO/UPC (f) Multimode Patch Cable Type B Note: Gigamon recommends that you use female MPO connector of cable type B, which is a cross-over cable. The female MPO connectors are in Key up position at both ends. |
12 Core, Multimode (50/125µm) |
|||||||||||||||
|
MPO/UPC (f) to MPO/UPC (f) Multimode Patch Cable Type B |
24 Core, Multimode (50/125µm) |
|||||||||||||||
|
LC/UPC to LC/UPC Duplex Singlemode Patch Cable |
SMF, (8-10.5µm) |
|||||||||||||||
|
MPO/APC (f) to [4] LC/UPC Duplex Single Mode Fanout Cable |
|
|||||||||||||||
|
MPO/UPC (f) to [4] LC/UPC Duplex Multimode Fanout Cable |
|
|||||||||||||||
|
LC/UPC to LC/UPC Duplex Multimode Patch Cable |
Multimode (50/125µm)
|
|||||||||||||||
|
Direct Attach Cable - CBL-205 |
|
|||||||||||||||
|
Cat5, Cat6, Cat6A, or Cat7 Cables with RJ-45 Connectors |
|
|||||||||||||||
|
Cat6A or Cat7 Cables with RJ-45 Connectors |
|