sffp profile

Required Command-Line Mode = Configure

Use the sffp profile command to configure the Control and User Plane Separation (CUPS) profile on a Control Processing Plane (CPN) for routing the Transport Agent (GTA) packets.

The sffp profile command has the following syntax:

 

sffp-profile alias <alias>
profile <add | delete>

add
  ip interface <interface>

   port-list <port number>

     type <control | user>

       sx-ips <interface>

The following table describes the arguments for the sffp profilecommand:

Argument	Description
sffp-profile alias <alias>	Specifies the name of the sffp profile. The alias must be unique and can contain up to 128 characters. Aliases are case-sensitive. For example: (config) # sffp-profile alias sffp-profile-1
profile <add | delete>	Specifies to add a sffp profile or delete a sffp profile.
add ip interface <interface> port-list <number> type <control | user> sx-ips <interface>>	Specifies to add the attributes of a sffp profile. The attributes are as follows: ● ip interface <interface> - Specifies the IP address of the IP interface. ● port list <port number>- Specifies the port number. The value ranges from 1 to 65535 ● type Specifies any one of the following node type: o control - Specifies the control node type for CPN. You can specify only a single port as control node type. o user - Specifies the following user interface node type for UPN. You can specify multiple ports as user interface node type . o sx-ips <interface>- Specifies the IP address of the SX interfaces of SFFP profile.   For example: (config) # profile add ip-interface 11.0.0.2 port-list 5000 type user sx-ips 10.10.6.7,10.10.6.8 Note:  The system supports 128 IPv6 or 256 IPv4 addresses for SFFP profile.

 

Related Commands

The following table summarizes the command related to the sffp-profilecommand:

Task	Command
Displays a specified sffp profile	show sffp-profile alias sffp-profile-1