Displaying Ports Configured with Uni-Directional, Simplex Cable/Links

When forcelinkup is enabled on a 100Gb network port on PRT-HD0-C06X24, the output of the show port and show port params commands display RXon as follows:

(config) # show port

(config) # show port params port-list 1/3/c2

Parameter 1/3/c2

 ======================  ===============

            Name Alias:                -

                  Type:          network

                 Admin:          enabled

           Link status:               up

        Auto Negotiate:              off

                Duplex:             full

          Speed (Mbps):           100000

                   MTU:             9400

         Force Link Up:             RXon

            Port Relay:              N/A

             Port Role:                -

      Ingress Vlan Tag:                -

       Egress Vlan Tag:             none

          Buffer Index:             high

             Discovery:              off

                   GDP:           enable

             Timestamp:                -

             Source-id:                 

              SFP type:        qsfp28 sr

       SFP vendor name:  GIGAMON Q28-502

         SFP vendor PN:      GMON85S-NGM

         SFP vendor SN:     INHAM7470183

 SFP Power (1-2) (dBm):      -0.01 -0.20

 SFP Power (3-4) (dBm):       0.04  0.30

 SFP Power (5-6) (dBm):         -      -

 SFP Power (7-8) (dBm):         -      -

 SFP Power (9-10)(dBm):         -      -

   SFP Temperature (C):            35.69

 Alarm THld (H-L)(dBm):         -      -

 Alert THld (H-L)(dBm):         -      -

     Power THld Status:              N/A

               Comment: